FLXA21 Modular 2-Wire Inductive Conductivity Analyzer

Model FLXA21
Modular 2-Wire Inductive Conductivity Analyzer

Product Information

FLXA21 Modular 2-Wire Inductive Conductivity Analyzer

The FLXA21 two-wire liquid analyzer offers single or dual sensor measurement. The modular-designed analyzer offers 4 kinds of measurements – pH/ORP (oxidation-reduction potential), contacting conductivity (SC), inductive conductivity (ISC) or dissolved oxygen (DO) – with the respective sensor module.

The FLXA21 Inductive Conductivity Analyzer performs non-contact measurement according to the inductive measurement principle so that it can be used to monitor the concentrations of acid, alkali and saline solutions in the chemical industry, as well as to measure the conductivity in a wide range of applications in industries such as food, pharmaceutical industry, plating and surface treatment processes, and paper and pulp. In addition, it has matrix compensation and output linearization functions to accurately measure strong acid and alkali solutions. Only one sensor can be connected.

For the wide range of industrial environment, the FLXA21 Inductive Conductivity Analyzer is designed with the enclosure of plastic, stainless steel or stainless steel with corrosion resistant coating.

*	Easy touch screen operation on 2-wire type analyzer
*	Simple HMI menu structure in 12 languages (English, Chinese, Czech, French, German, Italian, Korean, Polish, Portuguese, Russian, Spanish and Japanese)
*	Quick setup menu for immediate measurement
*	Indication of sensor wellness
*	HART communications
*	Enclosure – plastic, stainless steel or stainless steel with corrosion-resistant coating

Input specifications	Compatible with ISC40 inductive conductivity sensor with integrated temperature sensor: 30kΩ or Pt1000.
Input range	Conductivity: 0 to 1999 mS/cm at 25℃ (77℉) Minimum: 1 μS/cm (at process temperature) Maximum: 2 S/cm (at process temperature) Temperature: -20 to 140℃ (0 to 280℉).
Cable length	Max. 60 meters (200 feet). 10 meters (35 feet) fixed sensor cable + 50 meters (165 feet) WF10 extension cable.
Transmission signal	One output of 4 to 20 mA DC. Bi-directional HART® digital communication, superimposed on mA1 (4 to 20mA) signal. Burn up (22.0mA) or burn down (3.9mA) to signal failure accorded to NAMUR NE43.
Temperature compensation	Automatic or manual, for temperature ranges. Reference temp. programmable from 0 to 100℃ or 30 to 210℉ (default 25℃).
Calibration	Semi-automatic calibration using pre-configured OIML (KCl) stanard tables, with automatic stability check. Manual adjustment to grab sample.
Display	Black/White (213 x 160 pixels) LCD with a touch screen.
Analyzer Structure	Module structure
Housing	Case: Plastic (Polycarbonate), stainless steel without painting, stainless steel with epoxy coating, stainless steel with urethane coating Window: Polycarbonate (flexible) Protection: NEMA4X, IP66
Environment	Ambient Temperature: -20 to 55℃ Storage Temperature:-30 to +70℃ Humidity: 10 to 95 % RH (Non-condensing)
Regulatory Compliance	Safety : EN61010-1, CSA C22.2 No.61010-1 EMC : EN61326-1 Class A,Table 2 (For use in industrial locations), EN61326-2-3, AS/NZS CISPR11, Korea Electromagnetic Conformity Standard Installation altitude: 2000 m or less Category based on IEC 61010: I Pollution degree based on IEC 61010: 2
Explosion-proof	ATEX, IECEx, FM, CSA
Power Supply	Nominal 24 V DC loop powered system
Conduit Adapter	G1/2, 1/2NPT, M20 x 1.5
Weight	Approx. 1 kg (Plastic housing), Approx. 2 kg (Stainless steel housing)

Conductivity	Linearity: ±(0.4 %F.S. + 0.3 μS/cm) Repeatability: ±(0.4 %F.S. + 0.3 μS/cm)
Temperature	±0.3℃
Step response	90 % (< 2 decades) in 8 seconds

FLXA21 Modular 2-Wire Inductive Conductivity Analyzer

Product Information

Features

Specifications

Performance (Accuracy)