ISC40GJ, ISC40S Inductive Conductivity Sensors

Models ISC40GJ, ISC40S
Inductive Conductivity Sensors

Product Information

ISC40GJ, ISC40S Inductive Conductivity Sensors

The ISC40 inductive conductivity sensor is designed for use with the ISC202 2-wire transmitters, and the ISC450G 4-wire converter. This combination exceeds all expectations for conductivity measurement in terms of reliability, accuracy, rangeability and price performance.

This innovative inductive conductivity sensor provides highly accurate measurements over a wide measuring range (1 μS/cm to 1999 mS/cm) and process temperature range (-10 to 130 deg C) without changing the cell constant and conducting recalibration.

The erosion/abrasion resistant PEEK (Poly Ether Ether Ketone), which also features excellent chemical resistance in all solutions except Fluoric Acid or Oxidizing Concentrated Acids.

		General Specification for ISC40GJ, ISC40S
		User's Manual for ISC40GJ, ISC40S
		Selection Guide for Conductivity Analyzer

Features

*	Inductive conductivity technique for elimination of fouling and polarization errors.
*	Wide bore sensors for long term stability.
*	Installation flexibility due to wide range of holders and due to the use of universal bulkhead construction.
*	A single sensor can maintain the high resolution and accuracy, and measure the conductivity in an extremely broad range. Minimum span: 100 μS/cm Maximum span: 1999 mS/cm

Specifications

Compatibility	Compatible with the ISC202, ISC450G inductive conductivity transmitters/converter.
Measuring range	1 μS/cm to 1999 mS/cm
Output span	Minimum 100 μS/cm Maximum 1999 mS/cm
Process temperature	-10 to 130 deg C for continuous exposure. Suitable for steam-sterilizable applications.
Process pressure	Dependent on installation; but < 2 MPa (300 psi).
Process flow	Maximum 5 m/s.
Wetted materials	Sensor: PEEK (Poly Ether Ether Ketone) Gasket: Viton® or ethylene propylene copolymer rubber Adapter (optional): SUS316 Stainless steel or PVC or PVDF
Non-wetted materials	Sensor thread: SUS304 Stainless steel Retaining nut: SUS304 Stainless steel Cable: Weatherproof vinyl
Process connection	With retaining nut on G3/4 thread of sensor top for bulkhead mounting; optional process adapters or process fittings.
Process adapters	JIS 10K 50 RF flange adapter (Material: SUS316) JIS 10K 50 FF flange adapter (Material: PVC or PVDF) DIN PN16 DN50 flange adapter ANSI CLASS150 2 flange adapter R2 screw-in adapter
Cable length	5 m, 10 m, 15 m, 20 m
Weight	Sensor: approx. 0.6 kg

Applications

*	All applications where severe electrode fouling prevents the use of contacting electrodes.
*	All ranges except (ultra) pure water applications.
*	All slurry applications where conventional systems suffer from plugging or erosion.
*	All applications where the 6 decade rangeability is necessary for accurate process control.