Panel Mount Conductivity Analyzer SC100

	Home / Our Businesses / IA / Products / Environmental.. / Conductivity .. /
	Panel Mount Conductivity Analyzer SC100

Panel Mount Conductivity Analyzer
Model SC100

Product Information

The SC100 Panel Mount Conductivity Analyzer is ideally suited for applications using simplified instrumentation such as boiler water, and hydroponics.

Based on the design concept of conductivity analyzers through our experiences and achievements in the broad PA market for years, the SC100 is highly reliable and has the necessary basic functionality while retaining the capabilities of existing models. The converter packs simple functions in its compact housing, and also incorporates various highly reputed self-diagnostic features.

Dedicated conductivity sensors for the SC100 utilize our field-proven detection technology. They are of miniaturized and lightweight design, offering improved ease of use. The SC4A 2-electrode conductivity sensor in our conductivity sensor lineup may also be used.

Bulletin

General Specification

User's Manual

Features

* 96 x 96 mm panel mount design for indoor use.
* Easy access to routine maintenance mode.
* Practical functions packed in a compact housing.
* Large 4-digit display.
* One analog output and two/four contact outputs as standard feature.
* Self-diagnostics (e.g., calibration failure, measuring range failure, converter failure).

Specifications

Measuring range	0 to 50 mS x K cm^-1 (K: Cell constant)
Indication range	0.000 μS/cm to 200.0 mS/cm
Temperature input	Pt1000/Pt100
Temperature measuring range	-10 to 110 deg C
Output signal	1 output, 4 to 20 mA DC, isolated, load resistant 600 Ω or less
Output range	Configurable in the measuring range
Contact output	2 or 4 outputs, on/off action
Front panel	IP55/IP65 (optional)
Power supply	100 to 240 V AC 50/60 Hz
Ambient temperature	-5 to 45 deg C
Storage temperature	-25 to 70 deg C
Ambient humidity	10 to 90 % RH, non-condensing
Construction	Front panel: Dust-proof and drip-proof construction IP55 IP65 (when "/65" option is specified)
Power supply	Rated voltage 100 to 240 V AC (±10 %), 50/60 Hz
Weight	Approx. 600 g

Performance

under reference conditions with sensor simulation

Repeatability	±1 % F.S. (Conductiviity: 5 μS x K cm^-1 to 50 mS x K cm^-1)
Temperature reproducibility	±1 deg C
Converter output tolerance	±0.3 % of output span