Conductivity Sensor SC211G

	Home / Our Businesses / IA / Products / Environmental.. / Conductivity .. /
	Conductivity Sensor SC211G

Conductivity Detectors
SC211G

Product Information

Yokogawa has been supplying superior on-line analyzers for monitoring or controlling the conductivity of liquid or solutions.

Now, Yokogawa provides a four-wire conductivity converter, the SC402G, two-wire conductivity transmitters, the SC200 and SC202, and a panel mount conductivity converter, the SC150.

Yokogawa also provides many kinds of detectors/sensors for accurately measuring liquid conductivity when using convertors/transmitters.

The combination of Yokogawa’s converters/transmitters and detectors/sensors meets the demanding ultrapurewater requirements of the growing semiconductor and pharmacentical markets in addition to traditional water quality measurement requirements of standard power plant and chemical applications.

Specifications

SC211G	Cable with fork terminals (applicable to SC200S)
Object of measurement	Conductivity of solutions
Measuring principle	Four-electrode system
Cell constant	10cm-1
Measuring range	1 mS/cm to 1 S/cm
Temperature Range	0 to 100 degree C
Pressure range	0 to 200 kPa
Measuring solution condition	Although there is no limit to the flow rate when performing a measurement, less than 20l/min is recommended for the flow-through type. If slurry is included in the sample solution with flow-through type detectors, the electrode part and the inside of solution chamber may be worn significantly. To obtain the correct measured values, there should be no air bubbles in the sample solutions.
Temperature sensor	Pt1000
Wet part Materials	Sensor : platinum, glass, Silicon (O-ring) and Polytrifluorochloroethylene Body : polypropylene and Viton (O-ring) Construction : JIS C0920 rain proof