With loop control with PV switching or PV auto-selector, can I set alarms individually for analog values acquired on each input?

Yes, by using the following alarm types.

  • Analog input PV upper-limit alarm
  • Analog input PV lower-limit alarm
  • Analog input RSP upper-limit alarm
  • Analog input RSP lower-limit alarm
  • Analog input AIN2 upper-limit alarm
  • Analog input AIN2 lower-limit alarm
  • Analog input AIN4 upper-limit alarm
  • Analog input AIN4 lower-limit alarm

 

Související produkty a řešení

  • Advanced Application UT75A

    The UT75A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT75A also support open networks such as Ethernet communication.

    Viz více
  • Mid-level UT55A/UT52A

    The UT55A and UT52A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT55A/UT52A also support open networks such as Ethernet communication.

    Viz více
  • UP55A

    The UP55A is a newly-released 1/4 DIN sized program controller provides up to 30 program patterns, and simultaneous monitoring of 8 PV events, 16 time events, and 8 alarms. Also a ladder sequence function is included as standard.

    Viz více

Nahoru