PC-Based Data Acquisition Unit MX100

	Home / Our Businesses / Controllers & Data Acquisition / Products / Data Acquisition /
	PC-Based Data Acquisition Unit MX100

Product Home

Specifications

· Features

Software

Download

Contact

Features

1 2 3 4 5 6

Hardware Configuration

The MX is designed to enable desired measurement environments by combining three elements: the main module, input/output modules, and a base plate.
The assembled unit can be utilized on the desktop as-is (the modules have legs). Please note that DIN rails are used for rack-mounting.

Main Module (MX100)

The main module is the engine that controls data acquisition. It is equipped with a power supply, an Ethernet port, and a CompactFlash card slot. One main module can accommodate up to six input/output modules. The user can choose up to six moduels of any type.

Ethernet port:
For communication with the PC. Automatic recognition of 100Base-TX or 10Base-T
CF (CompactFlash) Card Slot:
With the CF Card, measured data is saved to the card if communication with the PC is interrupted. Since the card provides data backup, you do not have to worry about the possible loss of data even if the MX is configured for PC-based measurement.

Data Backup Time by CF Card Size
(Note: Minutes/hours/days are approximate.)

Number of saved channels	Measurement interval	32 M	128 M	512 M
10 channels	10 ms	2 hours	9 hours	36 hours
	100 ms	21 hours	3.5 days	15 days
	500 ms	4.5 days	18.5 days	75.5 days
	2 s	18 days	75.5 days	303 days
24 channels	10 ms	54 minutes	3.5 hours	15 hours
	100 ms	9 hours	37 hours	6 days
	500 ms	45 hours	7.5 days	31.5 days
	2 s	7.5 days	31.5 days	126 days
60 channels	10 ms	18 minutes	75 minutes	5 hours
	100 ms	3.5 hours	15 hours	2.5 days
	500 ms	18 hours	3 days	12.5 days
	2 s	3 days	12.5 days	50 days