- Home>
- Products & Solutions:
- Semiconductor Related Products & Systems:
- Direct Drive Motors:
- Product Information:
- Release Information:
- Announcement of Discontinuation of PLANESERV:
- Announcement of Discontinuation of DrvMII and DrvGII:
- Discontinued Products>
- Release Information:
- Release Information:
- Product Information:
- Product Information:
- Product Information:
- Product Information:
- Release Information
Release Information
Release of DrvGIII with MECHATROLINK-II Interface
Yokogawa released the MECHATROLINK-II compliant interface for Intelligent Driver DrvGIII of Direct Drive Motor DYNASERV / LINEARSERV. (May 20,2009)
MECHATROLINK-II is the open high-speed Motion Field Network and provides the following advantages.
- High resolution, high speed and high performance control, combined with multiple axes synchronous control
- Reduced wiring, simple configuration and low costs
- Combination with the positioning module (model with MECHATROLINK-II Interface) of FA-M3R(PLC) enables the fullest possible use of the performance (high speed and high resolution) of the motor, by making communication commands available.
*:DrvGIII for DYNASERV DR5A motor does not support MECHATROLINK-II.
- High resolution, high speed and high performance control, combined with multiple axes synchronous control
- Reduced wiring, simple configuration and low costs
- Combination with the positioning module (model with MECHATROLINK-II Interface) of FA-M3R(PLC) enables the fullest possible use of the performance (high speed and high resolution) of the motor, by making communication commands available.
*:DrvGIII for DYNASERV DR5A motor does not support MECHATROLINK-II.
Main Specifications
| Item | Specification |
| Interface | MECHATROLINK-II compliant | Transmission Rate | 10 Mbps | Transmission Cycle Time | 1 ms, 2 ms, 4 ms | Transmission Byte | 17 bytes / 32 bytes selectable | Communication Cycle Time | x 1 fixed | Number of Connectable Stations | Max. 9 when transmission cycle time is 1 ms. (Compliant to MECHATROLINK-II communications specifications) |
Maximum Transmission Distance | 50 m | Minimum Distance between Stations | 0.5 m |
