 |
|
|
|
INSERTION SENSORS
Stainless steel or Titanium 2-electrode sensors with cell constants of 0.02 cm-1, 0.10 cm-1, and fixed cables 3 to 20
meters in length.
Intended for the low conductivity applications found in the semiconducter,
power, water and pharmaceutical industries, these
sensors are designed in a convenient compact style. There are
several mounting possibilities, including a compression gland,
giving a simple effective method of direct insertion in process
pipework.
The sensors are made from a combination of wetted
materials approved by FDA. This makes them ideally suited for
the monitoring of pure water systems used in the preparation of
injectable solutions. For this kind of application, sanitary clamp
mountings are most often used.
As with all Yokogawa
conductivity sensors, the cell constants are individually calibrated
in our laboratories using an ASTM method traceable to NIST
international standards.
The SC4A-S-AD-15 in-line sensor has been designed according
to EHEDG guidelines for sterilizable applications, tested by TNO
(TNO report V99.930).
FEATURES
- Precise individually calibrated cell constant.
- Fast temperature response.
- Built-in Pt1000 temperature sensor.
- Fixed cable length 3, 5, 10, 15 or 20 mtr.
- Direct process insertion.
- Wide range of mountings.
- Compatible with PR4A retractably assembly.
- The sensor is polished to meet pharmaceutical requirements.
|
