- Home>
- Our Businesses:
- Environmental & Analytical Instruments:
- Product Group Index:
- Conductivity:
- __Conductivity:
- SC72 Conductivity pocketmeter:
- SC202G(S):
- SC450G:
- DC402G:
- SC42, FF40/FS40/FD40:
- SX42:
- SC4A, PR4A>
- Hamilton Conducell sensors:
- WU40:
- EXA 100 Series SC100 Panel Mount Conductivity Analyzer:
- ISC202G(S):
- ISC450G:
- ISC40G(S):
- Overview
WU40
Overview
Sensor cables for conductivity sensors
Product Description
These cables are for use with the Yokogawa conductivity
cells fitted with a cable connector. The plug/socket connection
between cell and cable meets the requirements of IP65.
The connector of the cable has a secure screw connection with simple wiring mode. The gilded contacts ensure good electrical contact to the connector of the conductivity cell.
The cable is six wire multicore and covered with a thermoplastic PVC. The wires are also covered with thermoplactic PVC individually and coloured.
The cable connections are supplied with 2 mm contact pins for connection to the transmitter, preamplifier or connection box: these pins guarantee a correct and simple connection to the terminals.
FEATURES
The connector of the cable has a secure screw connection with simple wiring mode. The gilded contacts ensure good electrical contact to the connector of the conductivity cell.
The cable is six wire multicore and covered with a thermoplastic PVC. The wires are also covered with thermoplactic PVC individually and coloured.
The cable connections are supplied with 2 mm contact pins for connection to the transmitter, preamplifier or connection box: these pins guarantee a correct and simple connection to the terminals.
FEATURES
- IP65
- finished cables with 2 mm contact pins
