Home>
Our Businesses:
Field Instruments:
Flow:
Metal Variable Area Meter:
Metal Variable Area Meter - RAKD:
Variable Area Flowmeter-RAMC:
Model RAGG Rotameter:
Model RAGH:
Small- and Laboratory- Rotameters RAGK , RAGL:
Rotameter and Trogamid or Polusulfon:
Model RAGN>
Customer Standards:
Yokogawa Rotameter catalogue:
Metal Variable Area Meter - RAKD

Metal Variable Area Meter - RAKD

Product Information

The small metal Rotameter RAKD differentiates itself from other comparable variable area meters by means of light and guided float design offering the smallest measurable flow ranges in the market. RAKD meters can be fitted with a fine control valve and are designed with horizontal process connections.
An integrated flow controller based on the differential pressure principle, which allows a constant flow rate to be maintained regardless of any variations in process pressure, is just one of the many different options available. The RAKD with either standard or fail safe limit switches is suitable for safety applications up to SIL level 2. The configuration with valve and controller reaches SIL level 1.
The RAKD Rotameter combines several benefits of the float principle: a robust design, reliable measurements, independence of the electrical power supply when operated as mechanical pointer instruments and an electrical output signal. They are moreover easy to install and require no maintenance. Both the RAMC and the RAKD are packaged in an attractive, all-stainless steel housing and boast a long service life under the harshest industrial conditions

Features

Easy-to-read-display
All stainless steel design
Suitable for applications according to IEC 61508 and ISO 13849
Adjustment valve and flow controller available
Fast connection technique using Quickon connector
Intrinsically safe outputs
Special material like Monel and Hastelloy on request

Specifications

For Pipe Sizes	DN 15 to DN 150 (1/2“ – 6“)
Process Connections	Flange, threaded or Triclamp
Measuring Range	Water 20°C: 0,1 l/h to 250 l/h Air 20°C 1 bar abs.: 4 l/h to 8000 l/h
Wetted Parts Material	1.4571 (AISI 316Ti) Hastelloy, Monel and Titanium on request
Process Temperature	-25°C to + 250°C
Process Pressure	100 bar, higher pressures on request
Ambient Temperature	-25°C to 100°C
Accuracy acc. VDE/VDI 3513-2(qG =50%)	4 %
Ex-approvals	ATEX, NEPSI, FM, CSA
Signal Outputs	Analog 4-20mA, pulse output
Power Supply	24 V DC 2-wire
Degree of Protection	IP66/IP67
Suitable for Applications acc. IEC 61508 and Machinery Directive ISO 13849	Yes
Additional Features	Limit switches for low/high alarms Fine control valves Pressure controller Easy installation with Quickon connector