YTA80
The YTA80 is a head mount type of temperature transmitter
that accepts thermocouple, RTD, ohms or DC milivolts input
and converts it to digital communication signal based on
FOUNDATION™ Fieldbus protocol.
The YTA80 conforms to the standard DIN formB head mounting.
- Download General Specifications YTA80 here
- Download Instruction Manual YTA80 here
- Download Fieldbus Device Files (DD and CF) here
Common specifications:
The YTA80 conforms to the standard DIN formB head mounting.
- Download General Specifications YTA80 here
- Download Instruction Manual YTA80 here
- Download Fieldbus Device Files (DD and CF) here
Common specifications:
| Supply voltage, DC: Standard, YTA80/KN2: | 9 – 32V |
| ATEX, YTA80/KS2: | 9 – 30V |
| In FISCO installations: | 9 – 17.5V |
| Consumption: | < 11mA |
| Max.current increase in the event of an error: | < 7mA |
| Isolation voltage, test: | 1.5kVAC for 60sec |
| Isolation voltage, operation: | 50VRMS/75VDC |
| Warm-up time: | 30sec |
| Signal/noise ratio: | min.60dB |
| Response time (programable): | 1 – 60 sec |
| Updating time: | < 400ms |
| Execution time, PID controller: | <200msec |
| Execution time, analogue input: | <50msec |
| Signal dynamics, input: | 24 bit |
| Calibration temperature: | 20 – 28ºC |
| Ambient temperature limits: | |
| (Option code may affects limit) | -40ºC to +85ºC |
| Vibration: | IEC 60068-2-6 and IEC60068-2-64 |
| Lloyd’s specification no.1: | 4g/2 – 100Hz |
| Humidity: | < 95%RH (non-cond.) |
| Tightness (enclosure / terminal): | IP68/IP00 |
| Weight: | 55g |
The powerful line-up of DPharp digital family is launched.
The world's smallest dual bent tube Coriolis Mass Flowmeter
The highlights of DPharp unique technologies that provides superior performance, stability and reliability in your measurement.
- EJX B Series Differential Pressure/Pressure Transmitters
Yokogawa's versatile field device management tool FieldMate is a so called hybrid solution supporting both EDDL as well as FDT/DTM technology.