|Since developing its first magnetic flowmeter for industrial use in 1953, Yokogawa has focused on broadening the range of applications for this technology. To ensure a high degree of reliability, the manufacturing of all key components is done in-house and in accordance with our rigorous quality control standards.|
Category of industry:
Oil & Gas, Electrical Power, Chemical, Pulp & Paper, Mining & Metals,
Water & Wastewater, Food & Beverage, Steel, Pharmaceutical & Cosmetics, etc.
|ADMAG series line-up:|
ADMAG AXR Two-wire Magnetic Flowmeters
The ADMAG AXR two-wire magnetic flowmeter can be installed in the two-wire system without any AC power source, thus drastically reducing the initial instrumentation cost.
The ADMAG AXR is the world’s first two-wire magnetic flowmeter which employs the fluid noise free “Dual Frequency Excitation Method,” achieving excellent stability for instrumentation.
Wiring: Two-wire Type: General-purpose use, Explosion proof type Size: 25 to 200 mm
- ADMAG AXF Series Magnetic Flowmeters
The AXF magnetic flowmeter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of field experience.
The ADMAG AXF employs the fluid noise free "Dual Frequency Excitation Method," achieving excellent stability for instrumentation.
Wiring: Four-wire Type & Size: General-purpose use, 2.5 to 2600 mm, Explosion proof type, 2.5 to 400 mm, Submersible type, 15 to 2600 mm, Sanitary type, 15 to 125mm
AXF Verification Tool page
- ADMAG AXW Magnetic Flowmeters
The AXW series is ideal for industrial process lines, and water supply / sewage applications. With outstanding reliability and ease of operation, developed on decades of field-proven experience, the AXW will increase user benefits while reducing total cost of ownership.
Wiring: Four-wire Type: General-purpose use, Submersible type Size: 500 to 1000 mm
ADMAG CA Series Capacitance Magnetic Flowmeters
The ADMAG CA capacitance-type magnetic flowmeter employs non-wetted electrodes, which are mounted outside a ceramic pipe to detect and measure the electromotive force generated in fluids through the capacitance of the pipe.
In addition, the ADMAG CA Magnetic flowmeter employs an advanced high-frequency excitation method that reduces flow noise in low conductivity fluids.
The adoption of this technology has reasolved the problems that were essentially unavoidable with conventional magnetic flowmeters, providing stable flow measurement with ultra-low conductivity fluids, sticky fluids, and concentrated slurries.
Wiring: Four-wire Type & Size: General-purpose use, 15 to 200mm, Explosion proof type, 15 to 100mm