ADMAG AE magnetic Flowmeters (Fieldbus communication type)

	Home / Our Businesses / IA / Products / Field Instruments / Flowmeters / ADMAG AE Mag. /
	ADMAG AE magnetic Flowmeters (Fieldbus communication type)

The ADMAG AE is our Advanced Engineering magnetic flowmeter. An evolution of the field-proven ADMAG series, the ADMAG AE employs the dual frequency excitation method to provide quick response and noise free output, and has a ceramic lining that supports an even greater range of applications.

Product Information

ADMAG AE series

ADMAG AE(Fieldbus communication type) is a compact type magnetic flowmeter that is the successor of the ADMAG AM and continues to use the dual frequency excitation method.
Ex-proof-type, both of integral and remote type, can be provided.

Specifications (Fieldbus Communication)

Features

Eliminates the drawbacks of the conventional pulsed DC excitation method.
The dual frequency excitation method provides stable measurement in fluid flow with high-density slurry and low conductivity fluid flow, as well as a quick response and high zero stability.
Superior abrasion and corrosion resistance for measurement for high-temperature application
Yokogawa's ceramic flow tube is 99.9% high purity alumina to deliver maximum reliability.
For batch control and pulsating flow measurement
Quick response of 0.1 sec allows accurate measurement in batch controlled and pulsating flows.
Highly reliable leak-free electrode construction
The electrodes are trouble-free due to no clearance between the molded PFA lining and springs.
The electrodes for the ceramic lining are also leak-free because there is no seal point between the electrode and ceramic flow tube thanks to the use of a unique liner molding technology.
Dual cavity housing converter for greater environmental resistance
Separation of electronic parts from wiring parts to protect them from water infiltrating into the wiring port.
Explosion-proof, integral type and remote type
An explosion-proof type with built-in barrier is available.

Specifications

AE Integral magnetic flowmeter(Fieldbus communication type)

		AE100		AE200	AE300
Size (mm)		2.5-10	15	25-200	250-400
Excitation		Dual frequency
Flow span (m/s)		0.3-10
Min. fluid conductivity (µS/cm)		20	5
Protection		IP67, NEMA4X, JIS C0920 watertight type
Hazardous area classification		ATEX/FM/TIIS(JIS)			ATEX
Accuracy		±0.5% of flowrate
Repeatability		±0.1% of flowrate (1 mm/s min.)
Lining material		Ceramic			-----
		Fluorocarbon PFA
		-----		Polyurethane
Electrode material	Ceramic	Pt-Al₂O₃ cermet			-----
	PFA	SUS316L, Pt-Ir, HastelloyC-276 equivalent , Tantalum, Titanium
	Polyurethane	-----		SUS316L
Fluid pressure		-0.1 MPa to 4 MPa: Ceramic lining size 50 mm or smaller -0.1 MPa to 2 MPa: Others
Fluid temperature		-10 deg C to 120 deg C: Ceramic lining, Fluorocarbon PFA lining -10 deg C to 40 deg C: Polyurethane lining
Process connection*		JIS 10K/20K/F12, ANSI 150/300, DIN PN10/16: Wafer, flange, union joint, ISO clamp
Output signal		Digital communication signal based on FOUNDATION™ Fieldbus protocol
Function		Bi-direction flow measurement, variable damping time (0.1 sec min.), alarm output at high/low limit, self-diagnostics, empty pipe detection, loop test
Indicator		7-seg. LCD with back light
Power supply voltage		80-264 V AC or 100-130 V DC
Maximum power consumption		12.5 W

*: Depends on the size and lining material.

AE Flow Tube(Fieldbus communication type)

	AE100		AE200	AE300
Size (mm)	2.5/5/10	15	25 to 200	250 to 400
Excitation	Dual Frequency
Flow Span (m/s)	0.3 to 10
Min. fluid conductivity (µS/cm)	20	5
Protection	IP67, NEMA4X, JIS C0920 Water Tight Type
Hazardous Area Classification	ATEX/FM/TIIS(JIS)			ATEX
Accuracy	0.5 % of flowrate
Repeatability	0.1% of flowrate (min. 1mm/s)
Lining Material	Ceramic			-----
	Fluorocarbon PFA
	-----		Polyurethane
Electrode Material	-----
Ceramic Lining	Platinum-alumina cermet			-----
Fluorocarbon PFA Lining	SUS316L, HastelloyC-276 equivalent, Titanium, Tantalum, Pt-Ir
Polyurethane Lining	-----		SUS316L
Fluid Press.	-0.1 to 4MPa : Ceramic Lining Size 50mm or smaller -0.1 to 2MPa : Other type
Fluid Temp.	-10 to 180 deg C : Ceramic Lining / -10 to 160 deg C : Fluorocarbon PFA Lining / -10 to 40 deg C : Polyurethane Lining
Process Connection	DIN PN10/16, ANSI150/300, JIS10K/20K/F12 : Wafer, Flange, Union joint or IDF clamp

AE14 Flow Converter(Fieldbus communication type)

Output Signal	Digital communication signal lased on FOUNDATION fieldbus protocol
Communication	FOUNDATION™ fieldbus
Function	Bi-direction flow measurement, variable damping time (0.1 sec min.), alarm output at high/low limit, self-diagnostics, empty pipe detection, loop test
Indicator	7 seg.LCD with back light
Protection	IP67, NEMA4X, JIS C0920 Water Tight Type
Hazardous Area Classification	ATEX, FM, TIIS(JIS)
Power Supply Voltage	80 to 264V AC or 100 to 130V DC
Maximum Power Consumption	12.5W
Mounting	2-inch pipe mounting