DPharp EJA Series Overview
EJA Pressure Transmitters
|
|
|
||||||||||
Selection Table
| *Note: Large size font is recomended for viewing. |
| Model | Application | Type | Capsule | Measurement Span | Maximum Working Pressure | |||
| kPa | inH2O | MPa | psi | |||||
 EJA110A |
Differential Pressure |
Traditional- Mounting*1 |
L M H V |
0.5 to 10 1 to 100 5 to 500 0.14 to 14MPa |
2 to 40 4 to 400 20 to 2000 20 to 2000 psi |
16*3 16 16 16 |
2250*3 2250 2250 2250 |
|
 EJA115 |
Flow | Integral Orifice |
L M H |
1 to 10 2 to 100 20 to 210 |
4 to 40 8 to 400 80 to 830 |
3.5 14 14 |
500 2000 2000 |
|
 EJA118W EJA118N EJA118Y |
Differential Pressure & Liquid Level with Remote Seals |
Extended Flush Combination |
M H |
2.5 to 100 25 to 500 |
10 to 400 100 to 2000 |
Based on Flange Rating | ||
 EJA120A |
Draft Range |
Traditional- Mounting*1 |
E | 0.1 to 1 | 0.4 to 4 | 50 kPa | 7.25 | |
 EJA130A |
Differential Pressure & Liquid Level |
Traditional- Mounting*1 |
M H |
1 to 100 5 to 500 |
4 to 400 20 to 2000 |
32 32 |
4500 4500 |
|
 EJA210A EJA220A |
Liquid Level, Closed or Open Tank |
Flush Extended |
M H |
1 to 100 5 to 500 |
4 to 400 20 to 2000 |
Based on Flange Rating | ||
 EJA310A |
Absolute (Vacuum) Pressure*2 |
Traditional- Mounting*1 |
L M A |
0.67 to 10 1.3 to 130 0.03 to 3 MPa |
2.67 to 40 0.38 to 38 inHg 4.3 to 430 psi |
10 kPa 130 kPa 3000 kPa |
40 in H2O 18.65 430 |
|
 EJA430A |
Gauge Pressure |
Traditional- Mounting*1 |
A B |
0.03 to 3 MPa 0.14 to 14 MPa |
4.3 to 430 psi 20 to 2000 psi |
3 14 |
430 2000 |
|
 EJA438W EJA438N |
Gauge Pressure with Remote Seal |
Flush | A B |
0.06 to 3 MPa 0.46 to 14 MPa |
8.6 to 430 psi 66 to 2000 psi |
Based on Flange Rating | ||
| Extended | A B |
0.06 to 3 MPa 0.46 to 7 MPa |
8.6 to 430 psi 66 to 1000 psi |
|||||
 EJA440A |
High Gauge |
Traditional- Mounting*1 |
C D |
5 to 32 MPa 5 to 50 MPa |
720 to 4500 psi 720 to 7200 psi |
32 50 |
4500 7200 |
|
 EJA510A EJA530A EJA530A /HAC |
Absolute & Gauge Pressure*2 |
Direct- Mounting |
A B C D |
10 to 200 0.1 to 2 MPa 0.5 to 10 MPa 5 to 50 MPa |
1.45 to 29 psi 14.5 to 290 psi 72.5 to 1450 psi 720 to 7200 psi |
200 kPa 2 10 50 |
29 290 1450 7200 |
|
| *1: | Traditional-Mounting is 1/4NPT or Rc1/4 process connections (1/2NPT or Rc1/2 with process adapter). |
| *2: | Measurement values in absolute for absolute pressure transmitter. |
| *3: | When combined with Wetted parts material code H, M, T, A, D, and B, the value is 3.5 MPa (500 psi). |
Enhanced Version of ADMAG AXR Series Two-wire Magnetic Flowmeters
The world's smallest dual bent tube Coriolis Mass Flowmeter
The powerful line-up of DPharp digital family is launched.
The highlights of DPharp unique technologies that provides superior performance, stability and reliability in your measurement.
The highlights of ADMAG series attractive features and specifications that promise you to measure the severe flow stably.
- EJX B Series Differential Pressure/Pressure Transmitters
FieldMate is a PC based configuration tool that performs numerous tasks, including initial setup, daily maintenance, troubleshooting, and configuration backup for device replacement.
