CA11E Handy Calibrator (for Voltage/Current)

	Home / Our Businesses / Port. Test Ins. / Calibrators /
	CA11E Handy Calibrator (for Voltage/Current)

Voltage/Current Calibrator
Both signal source and measurement functions
Simple operation, easy to use
Lightweight, compact body

Features

Source and Measuring of Voltage and Current:
General and measures voltages up to 30V DC and current up to 24 mA DC
Improved display resolution for current
The generation /measurement resolution has inproved to 0.001mA
24VDC(20mA) Loop check function
4-20 mA and 1-5 VDC Step-up/down Function:
The output level can be changed between 1↔2↔3↔4↔5V signals for the 1 to 5V DC output, for efficient calibration work.
20 mA SINK Function:
Absorb the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter, idea for loop checks.
Sweep Function:
Increase and decrease the output level to the preset level at a constant rate for the selected sweep time (16 or 32 seconds). The sweep function and sweep time are set by the internal dip switch.

Ordering code(Model No.): CA11E -1 with Curring Case.
　　　　　　　　　　　　　　　　　　　CA11E -2 with Rubber boot,strup ancl Accessory Case.