CW120 Clamp-on Power Meter, Energy Saving Model
Outline
Outline
Parameter setting software for CW120/121 "TOOLBOX"
Data analyzing software for CWseries "EasyChart"
- Compact&Light weight body with large back-lit LCD
- Current clamps in a range of sizes(small to large diameter)
- Support for large-capacity ATA flash memory
(equipped with PC card slot) - Data can be saved at from 1 second
- Wiring error check function
- 2 or 3-load system
- Simultaneous measurement of multiple use possible by external control terminal
- Parameters setting tool is included to set measurement conditions through PC
Specifications
- Measuring Function:
V/A/Active power/Reactive power/Power factor(lead/leg)/Frequency/Active electric energy/Regenrative electric energy(Only for data saving) - Input Voltage:
150/300/450V Range(CAT III 600V) Max:450V+10% - Current:
5/10/20/50/100/200/500/1000A Range
(Depend on Clamp probe to use) - Wiring Method:
CW120: Single-phase 2-wire, Single-phase 3-wire, 3-phase 3-wire,
Single-phase 2-wire 2-load system
CW121: Single-phase 2-wire, Single-phase 3-wire, 3-phase 3-wire, 3-phase 4-wire,
Single-phase 2-wire 2 or 3-load system - Accuracy:
1.2%(0.8% rdg + 0.4% rng)
(Depend on Clamp probe to use)
General Specifications
|
|
:
|
117 (W) × 161 (H) × 51 (D) mm
|
|
|
:
|
Approx. 600 g
|
|
|
:
|
AC100 to 240V (CAT II) Power supply from the measuring circuit using with power supply cable.
(*Power supply cable is not applicable to CE and UL standards) |
Catalog (PDF: 1MB)- User's Manual (PDF: 2.61MB)
- User's Manual (Operation Guide) (PDF: 312KB)
- User's Manual (Communication Functions) (PDF: 323KB)
Viewing pdf files requires Adobe Reader