TY500Series Digital Multimeter

TY500Series

TY530 TY520

● High Precision

Basic accuracy 0.09%

True RMS measurement

● Ensured Field Site Safety

Conforms to safety standards EN61010-1,
1000V CAT.Ⅲ, 600V CAT.Ⅳ

Safety shutters for preventing erroneous
insertion of test leads into current measurement
terminals

● New Functions for Yokogawa Middle Class DMMs

Current direct reading function provided by
current clamp sensor (optional)

Low-pass Filter (LPF)

Logging-mode memory for 1600 data*

USB communication, application software*
(Optional DMM communication package)
*TY530 only

● Closed Case Calibration

● 3-year Warranty

General Specifications

Measurement Functions	:	DC Voltage, AC voltage, DC current, AC current, resistance, frequency, temperature, capacitance, continuity check, diode test For AC voltage/current, RMS/MEAN detection can be switched (TY530 only). Low-pass filter can be switched on/off
Additional Functions	:	Data hold/auto hold/range hold, maximum/minimum/average values (TY530 only), resistance, relative and percentage value calculation, memory function (TY530 only), communication function (TY530 only), logging-mode memory (TY530 only), auto power off, backlight
Display	:	3.5-digit LCD: 7-segment Digital display: Main display; [6000] counts Bar graph display: 31-segment Polarity indicator: “-” appears automatically when the polarity is negative Overrange indicator: “OL”
Measuring Rate	:	5 times/sec (Frequency: 1 time/sec, Capacitance: max. 0.14 times/sec (1000μF), Resistance: 2.5 times/sec, Temperature: 0.7 times/sec), Bar graph display: 25 times/sec (DC voltage, diode test: 5 times/sec)
Operating Temp. and Humidity	:	-10 to 55°C; 80% RH or less (no condensation) 40 to 55°C; 70% RH or less
Storage Temp. and Humidity	:	-30 to 70°C; 70% RH or less (no condensation)
Temperature Coefficient	:	Add the accuracy 0.1/°C to the basic accuracy at a temperature within -10 to 18°C and 28 to 55°C.
Power Supply	:	Four AA (R6) dry cells
Battery Life	:	Approx. 300 hours (for continuous DC voltage measurement with alkaline cells)
Withstanding Voltage	:	6.88kV for 5 seconds (between input terminals and casing)
Dimensions	:	Approx. 90(W) x 192(H) x 49(D) mm
Weight	:	Approx. 570g (including batteries)
Compliance with Standards	:	Safety EN61010-1, EN61010-031, 1000V CATⅢ, 600V CATⅣ, pollution level 2, 2000m max. above sea level EMC: EN61326-1 Class B, EN55011 Class B Group 1
Standard Accessories	:	AA (R6) dry cells: 4, Test lead set (98015): 1, Fuse (installed) 440mA/1000V and 10A/1000V, Instruction manual: 1

Basic Accuracy & Ranges

		TY520	TY530
DCV	:	0.09% + 2,	0.09% + 2	600.0 mV to 1000 V
ACV:RMS	:	0.5% + 5,	0.5% + 5,	600.0 mV to 1000 V
DCA	:	0.2% + 2,	0.2% + 2,	600.0 μA to 10.00 A
ACA:RMS	:	0.75% + 5,	0.75% + 5,	600.0 μA to 10.00 A
Continuity Check	:	Buzzer Sounds at 50 ± 30 Ω or less, Range:600 Ω
Resistance	:	0.4% + 1,	0.4% + 1,	600.0 Ω to 60.00 MΩ
Diode Test	:	1.0% + 2,	1.0% + 2,	2.000 V
Temp.※	:	2.0% + 2 deg.℃,	2.0% + 2 deg.℃,	-50 to 600℃
Capacitance	:	2.0% + 5,	2.0% + 5,	10.00 nF to 1000 μF
Frequency	:	0.02% + 1,	0.02% + 1,	10.00 Hz to 99.99 kHz

		※Temperature probe:Type K thermocouple sensor ( optional )