TY700Series Digital Multimeter

TY700Series

TY710 TY720

● Highest Precision

Basic accuracy 0.020%

True RMS measurement

● New Functions for Electronic and Industrial Use

Simultaneous measurement and display of DC
and AC

Switchable RMS/MEAN detection※

Low-pass Filter (LPF)※

AC50mV range※

Lo-Power resistance measurement※
※TY720 only

● Full Support for Data Management

A large-capacity logging-mode memory
　 TY720: 10,000 data
　 TY710: 1,000 data

USB communication, application software
　 (Optional DMM communication package)

● Safe Design and Wide Temperature Range for Harsh Use

Conforms to safety standards EN61010-1
　 1000V CAT.Ⅲ , 600V CAT.Ⅳ

Safety shutters for preventing erroneous insertion of test leads into current
measurement terminals

Operating temperature range -20 to +55℃

Storage temperature range -40 to +70℃

● Closed Case Calibration

● 3-year Warranty

General Specifications

Measurement Functions	:	DC voltage, AC voltage, DCV+ACV, DC current, AC current, DCA+ACA, resistance, frequency, temperature, capacitance, duty cycle, decibel calculation, continuity check, diode test, low-power resistance (TY720 only) For AC voltage/current, RMS/MEAN detection can be switched (TY720 only). For AC voltage/current, the low-pass filter can be turned on/off (TY720 only).
Additional Functions	:	Data hold/auto hold/peak hold (TY720 only), range hold, maximum/minimum/average values resistance, capacitance zero, relative and percentage value calculation, manual-mode memory, logging-mode memory, auto power off, backlight (white LED)
Display	:	5-digit LCD: 7-segment Digital display: Main display; [50,000] counts Sub-display ; [50,000] counts Bar graph display: 51-segment Polarity indicator: “-” appears automatically when the polarity is negative Overrange indicator: “OL”
Measuring Rate	:	6 times/sec (Frequency: 1 time/sec, Capacitance: max. 0.03 times/sec (50mF), Resistance: 4 times/sec) Bar graph display: 15 times/sec
Operating Temp. and Humidity	:	-20 to 55℃; 80% RH or less (no condensation) 40 to 55C: 70% RH or less
Storage Temp. and Humidity	:	-40 to 70℃; 70% RH or less (no condensation)
Temperature Coefficient	:	Add the accuracy 0.05/℃ to the basic accuracy at a temperature within -20 to 18℃ and 28 to 55℃.
Power Supply	:	Four AA (R6) dry cells
Battery Life	:	Approx. 120 hours (for continuous DC voltage measurement with alkaline cells)
Withstanding Voltage	:	6.88kV for 5 seconds (between input terminals and casing)
Dimensions	:	Approx. 90(W) x 192(H) x 49(D) mm
Weight	:	Approx. 560g (including batteries)
Compliance with Standards	:	Safety EN61010-1, EN61010-031, 1000V CATⅢ, 600V CATⅣ, pollution level 2, indoor, 2000m max. above sea level EMC: EN61326-1 Class B, EN55011 Class B Group 1

Basic Accuracy & Ranges

		TY710	TY720
DCV	:	0.02% + 5,	0.02% + 5	50.000 mV to 1000.0 V
ACV:RMS	:	0.7% + 30,	0.4% + 30,	50.000 mV to 1000.0 V
ACV:MEAN	:	n/a,	1.0% + 30,	50.000 mV to 1000.0 V
DCV+ACV	:	1.0% + 10,	0.5% + 10,	5.000 V to 1000 V
DCA	:	0.2% + 2,	0.2% + 2,	500.00 μA to 10.000 A
ACA:RMS	:	1.0% + 10,	0.75% + 20,	500.00 μA to 10.000 A
ACA:MEAN	:	n/a,	1.5% + 20,	500.00 μA to 10.000 A
DCA+ACA	:	1.5% + 10,	1.0% + 10,	500.00 μA to 10.000 A
Continuity Check	:	Buzzer Sounds at 100 ± 50 Ω or less, Range:500.0 Ω
Resistance	:	0.1% + 2,	0.05% + 2,	500.00 Ω to 50.000 MΩ
LOW-power Resistance	:	n/a,	0.2% + 3,	5.000 kΩ to 5.000 M
Diode Test	:	1.0% + 2,	1.0% + 2,	2.4000 V
Temp.※	:	1.0% + 1.5 deg.C,	1.0% + 1.5 deg.C,	-200 to 1372℃
Capacitance	:	1.0% + 5,	1.0% + 5,	5.000 nF to 50.00 mF
Frequency	:	0.02% + 1,	0.02% + 1,	2.000 Hz to 99.99 kHz
Duty Cycle	:	±1%,	±1%,	10 to 90%

		※Temperature probe:Type K thermocouple sensor ( optional )