CENTUM CS Engineering - Yokogawa Indonesia

Objective

This course enables participants to learn to perform generation of CENTUM CS regulatory control functions, sequence control functions, information command station display and graphic functions using the workstation.

Duration

5 ( five ) days

Participants

For engineers involved in software generation or modification on the CENTUM CS system.

Prerequisite

Participants should have attended CENTUM CS Fundamental course.

Maximum Class Size

6 (six)

Course Contents

DAY	Morning (0900 to 1200 Hrs)	Afternoon (1300 to 1630 Hrs)
1st.	Startup and shutdown of workstation Window operations procedure System Builder and Operation Utility Function	Laboratory work : Startup and shutdown of workstation Window operations practice Project administration System builder definition
2nd.	FCS builder functions : Regulatory control	Laboratory work : Field control station configuration Control Drawing creation Test Function
3rd.	FCS builder function : Sequence control and logic diagrams On-line FCS builder functions	Laboratory work : Sequence table creation Logic diagram creation Test function
4th.	ICS builder functions Operator utility functions	Laboratory work : ICS builder functions Operator utility definition
5th.	Graphic builder function	Laboratory work : Graphic builder Test

FCS - Field Control Station
HIS - Human Interface Station

For course enquiries, please contact :

Training Group
Service Department
PT Yokogawa Indonesia
Wisma Aldiron Dirgantara, 2nd Floor,
Suite 202-209
Jl. Jend. Gatot Subroto Kav. 72
Jakarta 12780 Indonesia

Phone: (62)-21-799 0102
Fax : (62)-21-799 0070