| Objective |
|
The purpose of this course is to enable the user to setup and program
the stardom system. The user will be able to program the field controllers
using the logic Designer and the IEC61131-3 programming tools. While
IEC61131 programming is not specifically covered, the concepts are
introduced and the extra Yokogawa modules are covered. The user will learn
how to build graphics and setup the HMI at the controller level and up at
the VDS level. |
| |
| Duration |
|
3 (three) days |
| |
| Participants |
|
For engineers involved in software generation or modification of the
Stardom system. |
| |
| Prerequisite |
|
Participants should be familiar with IEC61131-3 programming or have
attended the IEC61131-3 programming training. |
| |
| Maximum Class Size |
|
5 (five) |
| |
| Course Contents |
|
| DAY |
Morning (0900 to 1200 Hrs) |
Afternoon (1300 to 1630 Hrs) |
| 1st. |
Introduction to Stardom
System Configuration
Hardware Configuration
Licenses
FCX Introduction
FCX Configuration
Resource Configuration
I/O Configuration
Logic Design Overview
Program Organization
Procedures |
Resource Configuration Using
Resources Configurator
Creating a Project
Creating a Control Application |
| 2nd. |
Data and Variables
IEC61131 Programming
PAS POU Function Block Summary
Connection
Function Block Summary
Function Block Detail
Debugging Tools |
Creating a Control Application
PAS POU Exercise |
| 3rd. |
VDS Introduction
Object Builder
Running Data Server
Functions
Graphics
Historian and Trend Function
Alarm and Message Function
Report Function
Security
HMI Configuration
Operator Display Function |
VDS Exercise
Creating a Graphic
HMI Builder |
|
| |
| |
FCS - Field Control Station
HIS - Human Interface Station |
| |
For course enquiries, please contact :
Training Group
Service Department
PT Yokogawa Indonesia
Wisma Aldiron Dirgantara, 2nd Floor,
Suite 202-209
Jl. Jend. Gatot Subroto Kav. 72
Jakarta 12780 Indonesia
Phone: (62)-21-799 0102
Fax : (62)-21-799 0070 |
