With the /F1 FAIL/Status output option, there's a memory sampling output setting (only on a DX with the advanced security option (/AS1)) and an output device information on memory stop (status relay) setting. What is the difference between these two?

With memory sampling output, the relay is energized on memory start, and deenergized on memory stop. With the output device information on memory stop setting, the relay is energized when you stop memory sampling. These actions cannot be changed.

Prodotti e Soluzioni Correlati

  • Button Operated DX1000/DX2000

    The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

    Vedi di più

Top