Executive Summary
Hanwha Chemical Corporation, a major Korean petrochemical company, produces polyvinyl chloride (PVC), vinyl chloride monomer (VCM), low-density polyethylene (LDPE), and other products. In 2009, the company acquired three plants from OCI Co., Ltd. that produce phthalic anhydride (PA), plasticizer (PLS), and maleic anhydride (MA) for both the domestic and international markets. Hanwha is continually striving to introduce new technologies that will help attain operational excellence and improve product quality.
The high cost of replacement parts and software modifications for a legacy control system together with the desire to improve availability motivated Hanwha Chemical to replace the system at one of the acquired plants with a Yokogawa CENTUM CS 3000 distributed control system (DCS).
The existing system included one engineering workstation (EWS), three controllers for PA, MA, and PLS, and five graphical user stations (GUS) within the same control network. There were approximately 2,000 I/O.
The new control system configuration is shown below.
The Challenges and the Solutions
(1) Hardware replacement and software conversion
Replacement of hardware and conversion of software were complicated processes requiring careful coordination and teamwork by the Yokogawa Korea and Hanwha Chemical personnel assigned to this migration project. While all field wiring could be kept as is, the terminal boards, I/O cards, and controllers all had to be replaced. On the software side, all existing software needed to be converted over to the CENTUM CS 3000. An engineering tool was first used to convert the system database, then the graphic displays, control drawings, and sequence logic were all converted. Working together as one team, Hanwha Chemical and Yokogawa Korea project personnel completed all configuration work for the new CENTUM CS 3000 system in just four months. All functions were subsequently confirmed with a factory acceptance test (FAT) at Yokogawa Korea's Seoul facility. This replacement and conversion dramatically improved system availability to 99.99999% and automated 90% of the plant's operations, which previously had been all manual.
(2) Plant downtime
To prevent any disruption in product deliveries, it was essential for Hanwha Chemical to minimize the amount of time this plant would have to be kept shutdown for the hardware installation and system cutover work. Working together, Hanwha Chemical and Yokogawa Korea project personnel completed this work on time and on schedule, in just 12 days. And to ensure a smooth transition to the new system, all plant operators and engineers received two weeks of comprehensive hands-on training on a demo machine at the Yokogawa Korea Training Center. As they already had 12 years' experience working with older Yokogawa systems at the company's other plants, they all soon were comfortable with using the new CENTUM CS 3000 DCS.
(3) Efficiency of the batch process
With the legacy system, operators often had to make manual adjustments and batch times varied considerably depending on how experienced an individual operator was. This drove up labor costs, in addition to having an impact on productivity and product consistency. Thanks to the new CENTUM system's improved graphic displays, operators have a much better grasp of what is happening throughout the plant and errors have been almost completely eliminated. As a result, automated batch operations are much more efficient and labor costs have been brought down by over 30%.
CENTUM CS 3000 in central control room
(4) Engineering efficiency
From an EWS in the central control room, engineers can easily make and confirm modifications to the system configuration. Modifications can be uploaded to the system without having to shut down the controller.
Engineering work station (EWS)
(5) Utility costs
The Ulsan plant uses a lot of water, steam, and electricity. Thanks to the improvements that were achieved with the new control system, this plant has reduced its utility costs by approximately 5% over the past three years.
Customer Satisfaction
According to J.K. Choi, senior manager & head of the plasticizer production team at the Ulsan plant, "Our operators were worried about the new DCS because they had been using the legacy system for 12 years. But the Yokogawa system has proven to be user-friendly and it has operational benefits. Thanks to the Yokogawa system, our operators have become more skillful in our batch process." He went on to say, "We are very happy with Yokogawa's DCS and service support. Of all the DCS vendors in Korea, Yokogawa's service is the best."
Achievement Summary
- Improved automation of batch process
- Reduced maintenance costs
- Stabilized process
- Increased capacity
- Improved customer service (faster response times)
- Reduced labor costs
- Improved product quality
Industrieën
-
Chemie
Chemische fabrieken zijn afhankelijk van continu- en batch-productieprocessen die elk verschillende eisen stellen aan een besturingssysteem. Een continu proces vereist een robuust en stabiel besturingssysteem dat niet faalt en de productielijn doet stilvallen. Bij een batchproces ligt de nadruk ligt op een besturingssysteem dat een grote flexibiliteit biedt bij het aanpassen van o.a. formules en procedures. Beide soorten systemen moeten worden beheerd naar aanleiding van de productiegeschiedenis rond de kwaliteit van het product, en in staat zijn om niet-routinematige werkzaamheden uit te voeren. Met een uitgebreide productportfolio, ervaren systeemingenieurs en wereldwijde verkoop- en servicenetwerk heeft Yokogawa een oplossing voor elk fabrieksproces.
-
Specialistisch en fijn chemisch
Yokogawa bedient al lange tijd klanten in de speciaal- en fijn chemie. Met een toonaangevende batchoplossing die de beste betrouwbaarheid en flexibiliteit in zijn klasse biedt, alsmede industrie-experts die de complexe eisen begrijpen die bij het ontwerpen van een batchoplossing komen kijken, kunt u er zeker van zijn dat u in samenwerking met Yokogawa een systeem krijgt waarmee u in de toekomst producten kunt produceren die voldoen aan de behoeften van uw klanten, terwijl de veiligheid en de naleving van de regelgeving gewaarborgd blijven.
Gerelateerde producten & oplossingen
-
Gedistribueerd besturingssysteem (DCS)
De DCS maakt automatisering en controle van industriële processen en verbeterde bedrijfsprestaties mogelijk. Meer dan 10.000 fabrieken vertrouwen op Yokogawa DCS om hun productiedoelen te bereiken.