JUXTA D Series Signal Conditioners

The D Series is a DCS-supported signal conditioner, consisting of modular units and a housing nest, and is available in a wide range of converters with versatile I/O specifications. Our complete line of conditioners work well for a large or small scale systems and provide a simple platform for use and maintenance. Mounting nest conforms with JIS and EIA specifications.

• Mixed mounting of Electronic and Pneumatic signal conditioners
  Mixed mounting of Electronic, Electronic-Pneumatic and Pneumatic-Electronic converters are available. Up to 16 converters can be mounted in one nest.
• Relaying HART communication signals
  Bi-directional relay of HART communication signals is possible while the field devices and the DCS are isolated from each other.
• BRAIN Communication function
  Equipped with communication functions, the conditioner allows such tasks as parameters setting, and monitoring to be done using a DCS (Yokogawa CENTUM-XL, µ-XL, etc.), PC (with VJ77 PC-based parameters setting tool) or Handy Terminal (JHT200).
• Standard second output
  A second output terminal on the front panel is available as standard for output to external recorders, indicators, alarm units, etc.
• Maintenance can be performed in the field without removing wiring or disturbing other loops.
• Manual backup for control output (DME, DMP)
  Backup connector for model SPBD Standby Manual Station is equipped, allowing the converter to be maintained without interrupting the control output signals during operation.
• Upper level communication
  By installing a DSC2 communication interface module, the D series signal conditioners can communicate with a PC or PLC.