JUXTA D Series Signal Conditioners
Specifications
Common Specifications
| Construction | Nest-mounting type (up to 16 units of conditioners and mounting nest) |
|---|---|
| Mounting Method: | Rack mounting (JIS/EIA specifications 19") or wall mounting |
| Connection Method: | M4 screw terminal (for input/output, communication, power supply and grounding) |
| Connecting cable (Yokogawa model: KS2) | |
| Air supply: Rc 3/8 (PT 3/8) female (2 points) | |
| External Dimensions: | 145×482.6×120 mm (H×W×D) |
| Power Requirements: | 24 V DC±10% |
Nests for mounting
| Model | Product Name | Descriptions |
|---|---|---|
| DCE | Nest for Input/Output | For connecting to model VM1, VM2, VM4 or PM1 card (Yokogawa). Maximum: 8 inputs/8 outputs, 16 inputs or 16 outputs. |
| DCP | Nest for Input/Output (E/P mixed mounting type) |
For connecting to model VM1, VM2, VM4 or PM1 card (Yokogawa). Maximum: 8 inputs/8 outputs, 16 inputs or 16 outputs. |
| DME | Nest for Control Input/Output | For connecting to model MAC2 or PAC card (Yokogawa). Maximum: 8 control inputs/8 control outputs. |
| DMP | Nest for Control Input/Output (E/P mixed mounting type) | For connecting to model MAC2 or PAC card (Yokogawa). Maximum: 8 control inputs / 8 control outputs. |
Signal Conditioners
| Model | Product Name | Input Type | Output Type | Descriptions |
|---|---|---|---|---|
| DA7 | Distributor (with HART Communication) | 4 to 20mA DC, from 2-wire type transmitter | Output 1: 4 to 20mA DC |
Bi-directional relay of HART communication signals is possible while the field devices and DCS are isolated each other. |
| DC7 | Output Isolator (with HART Communication) | 4 to 20mA DC | Bi-directional relay of HART communication signals is possible while the DCS and field devices are isolated each other. | |
| DA1 | Distributor | 4 to 20 mA DC, from 2-wire type transmitter | Output 1: 1 to 5 V DC Output 2: DC Voltage or DC Current |
|
| DA5 | Distributor (with Square Root Extractor) | Field configurable | ||
| DA9 | Distributor (Non-isolated) | Output 1: 1 to 5 V DC |
Non-isolated output | |
| DA2 | Distributor (with Communication Function) | Output 1: 1 to 5V DC Output 2: 1 to 5 V DC |
BRAIN Communication via DSC/DSC2 card. | |
| DA0 | Output Isolator (Voltage Input/ Current Output Type) | 1 to 5 V DC | Output 1: DC Current |
1500 V AC (1 min.) of withstand voltage for output signal. |
| DC0 | Output Isolator (Current I/O Type) | 4 to 20 mA DC | Output 1: 4 to 20 mA or 10 to 50 mA DC |
|
| DH0 | Output Isolator (Voltage I/O Type) | 1 to 5 V DC | Output 1: DC Voltage |
|
| DH1 | Isolator | DC Voltage or DC Current | Output 1: 1 to 5V DC Output 2: DC Voltage or DC Current |
Fixed range |
| DH2 | Isolator (Free Range Type) | Free range Field configurable | ||
| DH5 | Isolator (with Square Root Extractor) | 1 to 5 V DC | Field configurable | |
| DM1 | Isolator (mV Input Free Range Type) | DC mV Signal | Field configurable | |
| DR5 | RTD Converter (Free Range Type) | Resistance Temperature Detector (RTD) | Output 1: 1 to 5 V DC Output 2: DC Voltage or DC Current |
Field configurable |
| DRU | Cryogenic Temperature Converter | Yokogawa J263*B RTD or 4-wire type RTD | Field configurable | |
| DT5 | Thermocouple Converter (Free Range Type) | Thermocouple | Field configurable | |
| DS1 | Potentiometer Converter (Free Range Type) | Potentiometer resistance (3-wire type) | Output 1: 1 to 5 V DC Output 2: DC Voltage or DC Current |
Field configurable |
| DP1 | Pulse Repeater | Contact Pulse, Voltage Pulse or Current Pulse | Output 1: Open collector Output 2: Open collector |
Pulse rate fixed in 1:1 |
| DP3 | Pulse to Analog Converter | Output 1: 1 to 5 V DC Output 2: DC Voltage or DC Current |
Field configurable | |
| DQ0 | Analog to Pulse Converter | 1 to 5 V DC or 4 to 20 mA DC | Output 1: Open collector | Field configurable |
| DG1 | PT Converter (R.M.S.) | AC Voltage from PT | Output 1: 1 to 5 V DC Output 2: DC Voltage or DC Current |
R.M.S. conversion |
| DB1 | CT Converter (R.M.S.) | AC Current from CT | R.M.S. conversion | |
| DD1 | Tachometer Converter | AC Voltage from tachometer | Mean value conversion | |
| DF1 | Pneumatic to Electrical Converter | Pneumatic Signal | Output 1: 1 to 5 V DC Output 2: DC Voltage or DC Current |
Input signal range: 0.2 to 1.0 kg/cm2, 3 to 15 psi or 20 to 100 kPa |
| DF0 | Electrical to Pneumatic Converter | 1 to 5 V DC or 4 to 20 mA DC | Pneumatic Signal | |
| DSK | Limit Alarm | DC Voltage or DC Current | 2 Relay Contacts | 2 alarm outputs (N.O. or N.C. configurable) |
| DSC | Communication I/F Card | BRAIN Communication | ||
| DSC2 | Communication I/F Card | BRAIN/RS485 Communication (Changeable) | Applicable baud rate: 600 to 9600 bps. | |
| DX1 | Input/Output Thru Card | Input resistance: 250 ohm (input type 2 only) | Converts 4 to 20 mA DC signal to 1 to 5 V DC signals | |
