YS80 Series Rack Instruments

STED mV, Temperature and Potentiometer/Voltage ConverterConverters that convert the input signals from DC potential differences (mV DC), thermocouples, RTDs and slide rheostats, to isolated 1 to 5 V DC and 4 to 20 mA DC signals, and output them.

SKYD Alarm Unit
Alarm units enabling absolute value alarms or deviation alarms.

SALD mV and Temperature Alarm Unit
Alarm units that use DC potential difference (mV DC), thermocouples or RTDs as input signals.

SDAU Digital Alarm Unit
Digital alarm units that receive 2 inputs and can output absolute value alarms or deviation alarms.

SIND Integrator
Integrators that receive 1 to 5 V DC input signals, and output pulse signals.

SISD Isolator
Isolators that receive 1 to 5 V DC input signals, and output 1 to 5 V DC and 4 to 20 mA DC signals isolated from the input and power supply.

SDBT Distributor
Distributors that can be connected to a single 2-wire transmitter that outputs 4 to 20 mA DC signals.

SDBS Distributor
Distributors that can be connected to four 2-wire transmitters that output 4 to 20 mA DC signals. Inputs and outputs are not isolated. Each loop is isolated.

SDBU Distributor
Distributors that can be connected to 2-wire transmitters that output 10 to 50 mA DC or 4 to 20 mA DC signals. Types that connect to a single transmitter and types that connect to 4 transmitters are available.

SPLR Programmable Computing Unit
Computing units that come with a wide range of computing capabilities, and enable user programming.

PTED EMF- and RTD-to-Pneumatic Converter
Converters that convert mV DC input, thermocouple input, RTD input or 1 to 5 V DC input, to 20 to 100 kPa pneumatic output signals.
Note: The model PTED-1 to -3 have been discontinued, and the model PTED-5 (1 to 5 V input) is only available at this moment.
