CX1000/CX2000

PV math/SP math can be used in PID computation.
PID-computed result are used as PV or SP. By using the PV or SP that is evolved from original know-how, CX can control accurately in variety of applications.

As program operation is available for each loop, the CX can be applied for a variety of applications. Up to 30 program patterns can be set.

Independent multi-program pattern operation		Synchronous multi-program pattern operation
Up to 6 program patterns can be controlled independently Example: Independent program operation for 6 furnaces using the CX2620		Up to 6 program pattens can be controlled in the same time period Example: Synchronous program operation for a furnace using the CX2620

Simultaneous use of program operation and fixed-point contol mode		Distinguished display of program pattern process
Example: Synchronous program operation for 3 loops, fixed-point control mode on one loop using the CX2420		Program pattern and PV can be displayed one on top of the other during program control

Program pattern and program events can be displayed simultaneously

Time events and PV events can be set at any position in the pattern. 16 time events and 16 PV events can be displayed in program control display (all display). Any 5 selected events can be displayed (group display).