Skip navigation
Go to Global Navigation
Go to Primary Contents
Go to Site Information

YOKOGAWA

Yokogawa Electric Corporation

Data Acquisition Software Suite

DAQWORX

DAQ32Plus

DARWIN Configuration Software

This software configurations the DA100, DC100, and DR Series. Configurations can be uploaded/downloaded between DARWIN and your PC, including measurement ranges, measurement cycles, measurement start times, alarms, events/actions, and formulas. Settings can be stored on your PC's hard drive or a floppy disk for reuse. The setting screens use easy to view table formats.

Environment Setting Software

You can also graphically display the system configuration, including modules installed in DARWIN, and reconfigure the system as necessary when you change the modules installed in the DA100, DC100, or DR Series (expandable model). This software can also be used to calibrate DARWIN input modules.

Tag Setting Software

There are two types of tags: TAG NOs, which can be entered as up to 8 standard-width characters; and TAG COMMENTs, which can be entered as up to 16 standard-width characters. Tags can be displayed instead of channel numbers in the data logging software or the viewer software. With the DC100 and DR series, tags set using keys on the main unit can be loaded in the tag setting software, and tags set in the software can be sent to the main unit.