DAQWORX

DAQEXPLORER makes it easy to perform tasks such as entering DX/CX/MV settings over a network or transferring measurement data files from a DX/CX/MV series unit to a PC. Simply click or drag and drop icons on the Desktop (excluding DX100P/DX200P).

DAQEXPLORER contains software modules such as those listed below. The individual modules are integrates on the Desktop.

This software component automatically finds and displays DX/CX/MV-series units connected within the same segment as the PC being used on the network.

• Automatically searches for and mounts DX/CX/MV-series units on the network
• Starts the data monitor, data viewer and setup software (when using DXAdvanced/MVAdvanced's Batch function, batch information can be input upon memory start, and when using the Multibatch function of DXAdvanced R3 or later, memory start/stop can occur on individual batches).
• Facilitates memory start, stop and trigger
• Shows snapshot view of the active window
• Lists files in the internal memory and external storage media
• Transfers files automatically (as specified by interval or time)
• Allows manual file transfer (simply drag-and-drop)
• Prints snapshots automatically

Lets you monitor the measured data of DX/CX/MV-series units in a variety of formats, including trend displays, circular trend displays, digital displays, and meter displays.

1. Trend monitor
2. Circular monitor
3. Digital monitor
4. Alarm monitor
5. Color graph monitor
6. Meter monitor

Note that the remote monitors for DAQLOGGER Client, DAQ32Plus and DAQ32Plus Client, and data monitor for DAQEXPLORER cannot be used at the same time on the same PC.

Lets you exchange data on settings related to measurement and computation channels and on display settings with DX/CX/MV-series units, and save the data on the PC's hard disk or other media.*

* With the DXAdvanced R3 or later, screens cannot built or edited for the custom display function.

Program Pattern Setting

Program pattern setting

Embedded control loop program operation patterns can be created and set through a graphical interface for the CX1000/CX2000 Control and Measurement Stations.

Lets you view trend displays, digital displays, circular displays, and list display of data in the following three types of files, or print the files.

Data files generated by breaking up contiguous data into multiple files in DX/CX/MV units, or interrupted by a power failure or the like can be displayed as linked files. You can save the file linking conditions, so it is easy to redisplay linked files. Using the linked file display, you can also read numerical values in the displayed data using the cursor, calculate interval values, and convert data to ASCII or file formats compatible with Excel and Lotus 1-2-3.