The DC100 comes with a large 3-line VFD display (22 large characters x 1 line and 40 small characters x 2 lines), allowing you to recognize data easily, even from a distance. The DC100 is operated interactively through various guidance displays for making settings, making full use of this VFD display. And the key layout is designed for true ease of use and rapid, error-free operations.

1. START, STOP: Starts and stops the writing of measured data to the memory.
   
   
2. FD COPY:Copies the data file in the main memory to the floppy disk.
   
   
3. M. FUNC: The user can assign the desired action-control function to this.
   
   
4. DISPLAY, MODE: Selects the display line in the VFD and selects the display item on the selected line.
   
   
5. CLOCK: Sets the date and time.
   
   
6. RANGE: Sets up the input range of each channel or each group.
   
   
7. ALARM: Sets up the alarm function for each channel or each group.
   
   
8. SET: Sets up the measurement conditions (e.g., moving average, calculation, event/action, and unit settings).
   
   
9. FUNC: Sets up the operation conditions (e.g., calculation start/stop and keylock on/off settings).
   
   
10. MEM SET: Sets up the memory (e.g., number of divisions of the memory, data length setting, and storage method)

You can make settings easily using dialogs on the display which can display a total of 102 characters.
The setting item is always displayed in large characters at the top of the display, and the guidance message (auxiliary information), such as the setting range, is displayed in detail at the bottom of the display.
Also, items that are normally used frequently are grouped separately from items which, once set, are not changed frequently, thus simplifying routine operations.