• Log display function for continuous monitoring of radiation levels.
• Simulation function for operation and control training.
• Centerscale display function for monitoring power frequency.
• Special housing for SRHD, NRE, and mR100F compatibility.

Not only trend display and digital value but also log scale make you read data instantly. This signal unit can provide all information that in the field of continuous monitoring radiation levels.

Special Function Specification Code: /S13
Input and digital value display specification

The relationship between the input voltage of the LOG specific range and the digital display value is shown as follows:

To maintain continuous safe operations, operation and control training is essential. To support such training activities, we've created a simulation function. The screen update stop (trend, digital values, bar graphs, etc.) can be controlled during training via remote control or communications commands.

Special Function Specification Code: /S14
Screen display update
Input a signal to the remote control terminal (/R1), or use a communications command to stop the screen display update.



Clearing the internal memory/displayed waveform
In inputting a signal to the remote control terminal, or using communication commands to clear the internal memory, you can also clear the displayed trend waveform. When the remote control terminal's input signal changes from open to close, both the internal memory and the trend waveform are cleared.

To maintain stable power supply, you must monitor the power frequency fluctuations. To support your monitoring, we've included a scale display function which centers the display at the power frequency (50 Hz/60 Hz).