| R3.04 |
17-Sept-2009 |
Improvements to Modbus Functions
- Support for devices with the Ethernet-Serial Gateway function
- Added data types
- INT16 (server/slave)
- Bit (client/master)
- Connectivity with upstream devices
|
| R3.03 |
3-Dec-2008 |
Added Functional Enhancements
- Lite Monitor
- Setting List
- Bit output computation
- Added alarm DO and AO presets
- Modbus Slave/Server functions
|
| R3.02 |
7-Mar-2008 |
- Added the EtherNet/IP protocol
- Added the user authorization to the SMTP authorization function
|
| R3.01 |
26-Sept-2007 |
Style upgrade to style S3 to add the following new features
- Support for the 30-ch input module and pulse input module
- Added the reporting function
- Support for Windows Vista
Note: Please use the style upgrade kit (model 772050-2, must be purchased) to upgrade from style S2 to style S3 (function upgrade). |
| R2.22 |
21-Feb-2007 |
- When connecting MW100s to the DX2000 via Modbus/TCP, the Modbus server on the network (MW100) is connected automatically with the DX2000.
|
| R2.21 |
09-Nov-2006 |
- Added function that finds long-duration moving average of MATH channels
- Added an alarm delay function to alarm types (measurement and MATH channels)
- Added function allowing user to name data save folders
- Added function for saving a message that will be common to all files created from recording start to recording stop
- Communication input channels can substitute as MATH channels (equations of up to 8 chars. can be set)
- Added parameters to the acquisition intervals for Modbus communication (new parameters: 20 s, 30 s, 40 s, 50 s, 60 s, 90 s, 120 s)
- Support for tokuchu CANBus module (MX118-CAN-M30)
- Added custom object to Web monitor (displays specified string when alarm occurs)
- Fixes a bug in which, when there is no space on the CF card, recording stops when recovering from a power failure (if recording occurred with a data acquisition condition of ROTATE).
|
| R2.12 |
10-Jul-2006 |
- Fixed a bug in which the instrument does not operate correctly when computation is performed without any input modules installed in the MW100 (0 input modules or all measurement channels set to SKIP, etc.).
|
| R2.11 |
29-Mar-2006 |
- Add "Overview display" to "Monitor Display Screen"
- Add "Alarm Summary Screen" to "Monitor Display Screen"
- Add a file list box to select a file name when saving or loading setup data
- Add file division function to recording modes (require the web setting screen)
- Support the Ethernet 100Base-TX (The dip switch allows you to fix the communication speed to 10 Mbps Half duplex, if necessary.)
- Change applet attributes for communication
Applet: "Control.class" to "Commu.class"
|
| R2.06 |
27-Dec-2005 |
- Improved method for entering numbers with decimal points: Range, scaling, and MATH channel settings
- Collective setting of channels: Enter settings (input range, output range, MATH input) on consecutive channels all at once.
- Elimination of computation setting requirement: The requirement for one module with no SKIP measurement channels was eliminated.
- Fixed a bug in the timer reset action when the relay event of the event/action function is used for the level operation.
- Fixed a bug when entering settings in the serial communication setting screen.
|
| R2.04 |
02-Nov-2005 |
- Fixed a bug in which the recording stop operation was not available when the computation load reached approximately 100%.
- Improved communication performance
- Others
|
