- Home>
- Products & Solutions:
- Controllers, Recorders & Data Acquisition:
- Service & Support:
- Application Examples:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application note66:
- Application note67:
- Application note68:
- Application note69:
- Application note70 :
- Application note71:
- Application note72:
- Application note73:
- Application note74:
- Application note75:
- Application note76:
- Application note77:
- Application note78:
- Application note79:
- Application note80:
- Application note81:
- Application note82:
- Application note83:
- Application note84:
- Application note85:
- Application note86>
- Application Note
Application Note
Multipoint Monitoring of Boiler Temperature
For data recording and management by the DX in applications involving multipoint measurement such as monitoring of temperature in a boiler, there is a convenient remedy to the problem of too few inputs.
- Connect DAQMASTER MW100 via Modbus/TCP. Combined with the inputs of the DX main unit, this offers up to 348 points of recording.
- These 348 inputs are concentrated onto a single DX allowing easy centralized control, and simpler data management and monitoring.
