- Home>
- Products & Solutions:
- Controllers, Recorders & Data Acquisition:
- Service & Support:
- Application Examples:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application note66:
- Application note67:
- Application note68:
- Application note69:
- Application note70 :
- Application note71:
- Application note72:
- Application note73:
- Application note74:
- Application note75:
- Application note76:
- Application note77:
- Application note78:
- Application note79:
- Application note80:
- Application note81:
- Application note82:
- Application note83:
- Application note84:
- Application note85:
- Application note86>
- Application Note
Application Note
Recording Data from Sterilizers and Purifiers
Recording Temperature and Pressure Data
- Using the batch name + lot number system, past measured data can be recalled for reference by batch name.
- Supports barcode protocol (optional).
Barcodes can be used for input of batch information, batch comments, messages, and other data.
PLC Connections with Serial Communication (Optional)
- DXAdvanceds can be controlled from PLCs via serial communication by using dedicated communication commands.
- Main control commands
- PS (memory start/stop)
- BT (set batch number lot number)
- MS (write message)
- BJ (write free message)
- LL (login)
