- Home>
- Products & Solutions:
- Controllers, Recorders & Data Acquisition:
- Service & Support:
- Application Examples:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application note66:
- Application note67:
- Application note68:
- Application note69:
- Application note70 :
- Application note71:
- Application note72:
- Application note73:
- Application note74:
- Application note75:
- Application note76:
- Application note77:
- Application note78:
- Application note79:
- Application note80:
- Application note81:
- Application note82:
- Application note83:
- Application note84:
- Application note85:
- Application note86>
- Application Note
Application Note
Display and Recording of Test Data from Thermostatic Chambers
You can automatically compute and record relative humidity from dry bulb temperature and wet bulb temperature.
- Temperature and humidity can be displayed simultaneously
The µR10000/µR20000 can display in a variety of formats. For example, temperature and humidity can be shown together by setting up independent displays on the top and bottom rows. - Computation expressions can be edited at will
Because expressions and their constants can be set arbitrarily, you can enter various formulas (SPRUNG, PERNTER, etc.) and constants according to the conditions of your thermostatic chamber. - Computed results can be recorded together with temperature and humidity (voltage and current)
- No humidity converter required
No extra equipment such as a humidity converter is needed because you can automatically calculate relative humidity from the dry and wet bulb temperature sensor input by entering expressions for determining vapor pressure and saturated water vapor pressure on the µR's computation channels (M1 option).
