- Home>
- Products & Solutions:
- Controllers, Recorders & Data Acquisition:
- Service & Support:
- Application Examples:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application Note:
- Application note66:
- Application note67:
- Application note68:
- Application note69:
- Application note70 :
- Application note71:
- Application note72:
- Application note73:
- Application note74:
- Application note75:
- Application note76:
- Application note77:
- Application note78:
- Application note79:
- Application note80:
- Application note81:
- Application note82:
- Application note83:
- Application note84:
- Application note85:
- Application note86>
- Application Note
Application Note
Application for a Time Proportioning Output Converter
The UTAdvanced Digital Indicating Controller comes standard with ladder sequence programming. The ladder sequence function can handle measured and computed values from the controller. Using this function, the UTAdvanced converts outputs from other controllers such as YS15001 to time proporioning outputs.
1: Yokogawa's single-loop controller
This is easy to achieve by setting up the ladder program below on the UTAdvanced (it is not necessary to enter settings for PID and other parameters, and you can simply set output type parameters to voltage pulse output.)
Note that when conversion to current output is required, you can set the output type parameters to current output.
And for the display section, since you can turn OFF the SP value and status display sections (e.g.: AUTO/MAN and R/L displays) on the UTAdvanced, you can create a simpler display that only shows the indicated value.
