Category Sitemap
Home / Our Businesses / Controllers & Data Acquisition / Service & Support / FAQ /
DX Series Paperless Videographic Recorders
MATH functions
Questions
MATH
Integration
Answers
MATH
Yes. A record is kept in the same manner as with measurement channels.
Top of this page
Yes. They can be displayed in trends in the same manner as with measurement channels.
Top of this page
All channels at once. MATH reset also applies to all channels at once.
Top of this page
24 hours is the longest interval.
Top of this page
If you install the MATH option (/M1) you can use the report function. There are hourly, daily, weekly, and monthly reports, and the average, maximum, minimum, and integral values of the specified channel are written to the internal memory.
Top of this page
Integration
If you install the MATH option (/M1) you can use perform integration using the TLOG computation. Using these operators, you can record integral data at specific times.
Top of this page
When integrating with the TLOG computation, you can reset the values with the timer function.
Top of this page
For relative timers, set the time until the end of the interval (00:01 to 24:00). For absolute timers, set a reference time, then choose one of the following intervals. 1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 10 min, 12 min, 15 min, 20 min, 30 min, 1 h, 2 h, 3 h, 4 h, 6 h, 8 h, 12 h, 24 h
Top of this page
Yes, but this requires a special order. Please contact your nearest dealer or representative.
Top of this page
GLOBAL  
YOKOGAWA

Powered by Ultraseek
FAQ
·  DX Series Paperless Videographic Recorders
Contact Form
If you can not find your answers here, please feel free to contact us.
Contact