|
| Connect the DX via Ethernet to a network that has a PC acting as an FTP server. Set up an account for the DX on the FTP server, and enter any settings needed to enable the DX to access the server. The FTP server should be turned ON at all times. |
| Display, event, data, and report files. |
| Files are sent when newly created at the auto save interval or otherwise. Previously created files cannot be sent, but files that failed to be sent due to network trouble are sent again along with the latest data when the connection is restored. |
| You can use the FTP client function on the PC to send or delete files on an external memory medium.
However, files in internal memory cannot be accessed. |
| This is possible using the Web server display function. After connecting to the network via Ethernet, you can enter the URL of the DX into a Web browser (such as Internet Explorer) on a PC and view the screen currently being displayed by the DX on the browser.
However, you cannot save the data to the PC or view the data in real time (the data is updated every 30 seconds or so). |
| The page update interval for the Web monitor is about 30 seconds. |
| Pages accessed over the Web are either operator pages or monitor pages.
Operator pages can be switched from the Web browser. Monitor pages cannot be switched. |
| The IP address is set on the DX main unit itself. |
|
|
| · |
DX Series Paperless Videographic Recorders |
|
|
|
|
| If you can not find your answers here, please feel free to contact us. |
|
|
|
|
|
