Frequently Asked Questions
JUXTA Series Signal Conditioners
Operation and settings
Questions
Editing settings
Answers
Editing settings
| 1. Can burnout be changed? |
| Yes, with the microcomputer-based JUXTA series signal conditioner. A handy terminal is required to make changes (changes cannot be made with the VJR6, VJT6, VJS2, MR6, MT6, MS2, or other such signal conditioner). |
| 2. Can the range be changed on the MQ0? |
| The range cannot be changed for this model after purchase. As an alternative, the compact VJQ7 is available (note that a setting software program (sold separately) is required when changing the range). |
| 3. How is a handy terminal (JHT200) connected to a conditioner that allows range changes? |
| For the F and W series, a dedicated 3-pin cable is used. A dedicated 5-pin cable is used for the D series. For the VJ, J, and M series computing units, use a 5-pin cable with a modular converter (E9786WH, sold separately). |
| 4. Can the range be changed with the brain terminal BT200? |
| If connected with a model that allows range changes, it can be used in the same operation as the JHT200. However, a different cable from the standard accessory cable must be used (and therefore purchased, if necessary). 3-pin cable: Model F9182ED. 5-pin cable: Model F9182EE. Modular converter: Model E9786WH. |
| 5. Can I change the range on the VJT6? |
| The range cannot be changed for this model after purchase. As an alternative, the VJU7 is available (note that a setting software program (sold separately) is required when changing the range). |
| 6. Editing JUXTA settings |
|
Using the following tools, listed items in the manual attached to the product can be changed. -Handy terminal JHT200, JHT100 -Brain terminal BT200. -Parameters Setting Tool VJ77 Example of setting: -Input/output ranges: can be set by entering numeric values -Burnout: can be set by selecting either UP, DOWN, or OFF -Tag No: can be set by entering alphanumeric character |
