 |
|
 |
Home / Our Businesses / Controllers & Data Acquisition / Support / FAQ / |
|
Frequently Asked Questions PR300 Power and Energy Meter |
|
|
| Questions |
|
|
|
|
|
|
| 1. | What is the demand measurement function? |
| 2. | Can the PR300's triple displays be assigned to any measurement element? |
|
| Answers |
|
|
|
|
|
| The PR300's demand measurement function measures average power or average current within a specified time limit. The maximum value during the demand measurement period can also be measured. An alarm is output (open collector) if a specified demand alarm point is exceeded. A demand alarm mask time can also be set to prevent unnecessary alarms near the start time within the time limit. Find out more about the PR300 Power Monitor here. |
|
|
| Yes. Any measurement element can be assigned to any of the three displays (upper, middle or lower). Specified phases of voltage and current can also be assigned, and you can scroll the displays through the phases with the SEL key. Find out more about the PR300 Power Monitor here. |
|
|
|
|
| GLOBAL |
|
 |
|
|
|
|
|
| Recorders and Data Acquisition Equipment |
| Test and Measurement Instruments |
| Portable Test Instruments |
| Semiconductor-related Products & Systems |
| Integrated Information Systems (MES) |
| Solution-based Software (APC, PIMS) |
| Consolidated Alarm Management System (CAMS) |
| Data Acquisition Equipment |
| Industrial Recorders |
| Oscillographic Recorders |
| Paperless Videographic Recorders |
| Hybrid Recorders |
| Waveform Measuring |
| Power Measuring Instruments |
| Optical Measuring Instruments |
| Wireless Communication Equipment |
| Frequency and Time Interval |
| Signal Generators |
| Portable Data logger |
| Digital Multimeters |
| Insulation Testers |
| Clamp-on Power Meters |
| Clamp-on Testers |
| Process Calibrators |
| Thermometers |
| Precision Measuring Instruments |
| Environmental Measuring Instruments |
|
||
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
