- Home>
- Products & Solutions:
- Controllers, Recorders & Data Acquisition:
- Service & Support:
- One Point Lessons:
- MVAdvanced MV1000/MV2000:
- JUXTA M Series Signal Conditioners :
- JUXTA D Series Signal Conditioners:
- MW100 Data Acquisition Unit:
- PR300 Power and Energy Meter:
- µR Series Industrial Intelligent Recorders :
- UTAdvanced Digital Indicating Controllers>
- UT/UP Series Digital Indicating Controllers:
- DXAdvanced DX1000/DX2000:
- YS1000 Series Single-loop Controllers:
- HXS10 SolStation Solar Tracking Controllers:
- JUXTA M Series Signal Conditioners
Introducing Useful Functions
JUXTA M Series Signal Conditioners
JUXTA includes an operation indicating lamp that alerts users to disconnections or instances when the input value exceeds the input range (OVER).
[Affected Models]
MA5 Distributor (1-output), MA5D (2-output, isolated), MH5 Isolator (1-output), MH5D (2-output, isolated), MU5 Universal Temperature Converter (1-output), MU5D (2-output, isolated) MS5 Potentiometer Converter (1-output), MS5D (2-output, isolated)
[Blinking Display during Abnormalities]
--Input signal of 25% of the input range or higher--
Burnout when input wiring disconnected: Universal Temperature Converter, Potentiometer Converter RJC sensor abnormality: Universal Temperature Converter
You can check for abnormalities on the JHT200 Handy Terminal or the VJ77 setting tool by checking the ERROR display under SELF CHK in the self diagnosis results. By selecting the item, you can check the status of the abnormality, such as INPUT OVER RANGE or RJC ERROR.
