MW100 Data Acquisition Unit

*Added function for the firmware R3.03

Modbus Slave/Server Function

• Coils allows you to map data on communication input channels.
• Communication channels can be accessed in bit form by PLCs and other upstream devices.
  
  -0 (Off) when data is 0, +/- infinity, or non-numerical (Nan).
  -1 (On) when data is non-zero.
  
  
  
  
• Input relays for measurement and computation channels, and for mode information.
  
  
  • If the measurement channel is DI, ON/OFF status can be read as bit data by the PLC or other device's .
  • The MW100's operating status, presence/absence of alarms, and other status information can be ready by upstream devices.

• Mode information input registers (integer).
  
  MW100 operating status information can be acquired on Modbus-connected upstream devices.
  
  -Running: 1 (On)
  -Stopped: 0 (Off)