- About Yokogawa:
- 2012 Press Releases:
- 2012 Press Releases-01:
- 2012 Press Releases-02:
- 2012 Press Releases-03:
- 2012 Press Releases-04:
- 2012 Press Releases-05:
- 2012 Press Releases-06:
- 2012 Press Releases-07:
- 2012 Press Releases -08:
- 2012 Press Releases-09:
- 2012 Press Releases-10:
- 2012 Press Releases-11:
- 2012 Press Releases-12:
- 2012 Press Releases-13:
- 2012 Press Releases-14:
- 2012 Press Releases-15:
- 2012 Press Releases-16:
- 2012 Press Releases-17:
- 2012 Press Releases-18:
- 2012 Press Releases-19:
- 2012 Press Releases-20:
- 2012 Press Releases-21:
- 2012 Press Releases-22:
- 2012 Press Releases-23:
- 2012 Press Releases-24:
- 2012 Press Releases-25:
- 2012 Press Releases-26:
- 2012 Press Releases-27:
- 2012 Press Releases-28:
- 2012 Press Releases-29:
- 2012 Press Releases-30:
- 2012 Press Releases-31:
- 2012 Press Releases-32>
- 2012 Press Releases-11
2012 Press Releases-11
Tokyo, Japan - June 18, 2012
Yokogawa Meters & Instruments Releases AQ1200E, AQ1205A, AQ1205E, and AQ1205F OTDR Multi Field Testers
AQ1200 OTDR series
Yokogawa Meters & Instruments Corporation announces that it will release the AQ1200E, AQ1205A, AQ1205E, and AQ1205F multi field testers in markets other than Japan on June 29. These are new additions to the AQ1200 OTDR*1 series of multi field testers, which are used to test the physical condition of fiber-optic telecommunications networks.
Featuring high performance and easy handling, our AQ1200 OTDR series multi field testers are compact, lightweight, and moderately-priced, with all the functions needed in the field. Among the new models announced today, the AQ1200E, AQ1205E, and AQ1205F each support three different wavelengths, so that even a single unit can cover installation and maintenance work for an entire access network (a network between the station and subscribers). The AQ1205A, AQ1205E, and AQ1205F also feature a wide dynamic range*2 and enhanced waveform quality, ensuring accurate measurements with fiber-optic communication networks that have a large-port-count optical splitting device with a high insertion loss.
To respond to the growing volume of video and other types of data transmitted over networks, high-speed and large-capacity fiber-optic telecommunications networks are being installed all over the world. There is strong demand for OTDRs in emerging countries like China and India that are rapidly expanding their fiber-optic networks. In countries such as Japan and South Korea where the fiber-optic communication infrastructure is already well established, OTDRs are also increasingly in demand for maintenance work that will ensure communication quality and stable operation.
Yokogawa also offers a high performance OTDR fiber-optic tester, the AQ7275. This versatile high-end model can be used in the installation and maintenance of trunk lines that connect large cities to access networks. However, for operations that mainly involve the field maintenance of access networks, a smaller and lighter measuring instrument is needed.
To satisfy this need, Yokogawa released the compact, lightweight, and moderately-priced AQ1200 OTDR series in February 2010. Each of the initial three models in this series has a different measuring wavelength and dynamic range.
All AQ1200 OTDR series multi field testers are compact (A5 size), lightweight (approximately 1 kg), and come with various essential functions for the field maintenance of fiber-optic communication networks. They are just half the size and one-third the weight of the AQ7275.
These testers all support passive optical network (PON) systems that branch out optical fibers from stations using an optical splitter and connect them to multiple subscribers. With PON systems, a measurement waveform tends to deform due to the attenuation of optical signals at a splitter. The AQ1200 OTDR series multi field testers can determine whether any problem is caused by a line failure or signal attenuation, and can accurately pinpoint failure locations, if any.
The features of the new models announced today are as follows:
- Supporting three different wavelengths
The AQ1200E, AQ1205E, and AQ1205F models each support two wavelengths for the installation of telecommunication networks and another wavelength for maintenance. Thus, each of these testers can cover both installation and maintenance of an access network.
These testers also have a filter in their optical port that blocks the communications wavelength so that it does not disturb measurements made with the maintenance wavelength. This means that even if OTDR measurement is being performed on a network while it is in use, the maintenance work will not affect communication quality and the network operation will not influence the measurement accuracy.
- Accurate measurement of PON systems
The AQ1205A, AQ1205E, and AQ1205F have a wide dynamic range and enhanced waveform quality, enabling accurate measurements even with PON systems that have a large port count splitter.
|Wavelength||1310/1550, 1625 nm||1310/1550 nm||1310/1550, 1625 nm||1310/1550, 1650 nm|
|Dynamic range||34/33, 33 dB（typ）||42/40 dB（typ）||42/40, 36 dB（typ）||42/40, 37 dB（typ）|
The International Telecommunication Union (ITU), an agency of the United Nations responsible for international telecommunications standards, has specified that the following wavelengths should be used for fiber-optic telecommunications:
- Maintenance: 1625/1650 nm
- Telecommunications: 1310/1490/1550 nm
As the wavelengths used for telecommunications and maintenance vary depending on country, region, and service provider, the right product must be selected for each condition.
Major Target Markets
Maintenance divisions of telecommunications providers and field operations divisions of companies engaged in the installation and maintenance of fiber-optic networks
Installation and maintenance work involving the inspection and assessment of optical fibers
- *1: An optical time domain reflectometer (OTDR) is an instrument that is used in network installation and maintenance applications to measure the length and attenuation of optical fibers, check the condition of splice points, and locate failures such as line breaks.
- *2 Dynamic range: The ratio between the largest and smallest detectable signals. In fiber-optic measurement, a larger dynamic range enables measurement over a longer distance.
Yokogawa's global network of 25 manufacturing facilities and 80 companies spans 54 countries. Since its founding in 1915, the US$3 billion company has been engaged in cutting-edge research and innovation, securing more than 7,200 patents and registrations, including the world's first digital sensors for flow and pressure measurement. Industrial automation and control, test and measurement, information systems and industry support are the core businesses of Yokogawa. For more information about Yokogawa, please visit the website www.yokogawa.com
Press Releases in June of 2012
- June 25, 2012Yokogawa Wins Control System Order for Large Thermal Power Plant in India
- June 18, 2012Yokogawa Meters & Instruments Releases AQ1200E, AQ1205A, AQ1205E, and AQ1205F OTDR Multi Field Testers
- June 15, 2012Yokogawa Releases Enhanced Version of CENTUM® VP Integrated Production Control System