Traffic TesterPro AE5511

Module

Interface

Number of Ports

AE5520 10/100 BASE-T unit

10 BASE-T, 100 BASE-TX

16 ports

AE5521 1000 BASE-X unit

1000 BASE-SX, 1000 BASE-LX

4 ports (GBIC)

AE5522 10 GBASE-X unit

10 GBASE-LR, 10 GBASE-ER, 10 GBASE-SR

2 ports (XENPAK)

AE5523 1000 BASE-T unit

10 BASE-T, 100 BASE-TX,1000 BASE-T

12 ports

1000 BASE-SX/LX

1 port (SFP)

AE5524 1000 BASE-X unit

1000 BASE-SX, 1000 BASE-LX

12 ports (SFP)

The following table lists the functions that are supported by each unit and test mode.

x: Supported, -:Unsupported

Functions			AE5520	AE5521	AE5522	AE5523	AE5524	Traffic mode	BERT mode
Login	Multi AE5511 control^*1,2		x	x	x	x	x	x	x
	Monitor mode^*3		x	x	x	x	x	x	x
	Multi user support (8 users)^*4		-	-	-	x	x	x	x
Setup	Auto negotiation	Speed DUPLEX, MDI/MDI-X	x	-	-	x	-	x	x
	Auto negotiation	Flow control	x	x	-	x	x	x	x
	Clock extraction setup^*5		-	-	-	x	-	x	x
	RF auto response		-	-	x	-	-	x	x
	Link UP/DOWN	Single	x	x	x	x	x	x	x
	Link UP/DOWN	Cycle	-	-	-	x	x	x	x
	PoE setup		-	-	-	x	-	x	x
	Transmission setup(constant/burst)		x	x	x	x	x	x	x
	End by(manual/count/time)		x	x	x	x	x	x	x
	Transmission mode(variable/fixed)		x	x	x	x	x	x	-
	Number of registered frames^*6		x	x	x	x	x	127	1
	Error frame setting	CRC error	x	x	x	x	x	x	x
	Error frame setting	Symbol error	-	-	-	x	x	x	x
	Preamble edit^*1		-	-	-	x	x	x	x
	Insert time stamp		x	x	x	x	x	x	-
	Insert sequence counter		-	-	-	x	x	x	-
	Variable frame length		x	x	x	x	x	x	x
	Variable field	1 variable field	x	x	x	x	x	x	-
	Variable field	4 variable field	-	-	-	x	x	x	-
	Insert mode setup	Sigle	x	x	x	x	x	x	x
	Insert mode setup	Cycle	-	-	-	x	x	x	x
	Oversize threshold		x	x	x	x	x	x	x
	Base filter setup		x	x	x	x	x	x	x
	Sequence error object setup		-	-	-	x	x	x	-
	BERT checked byte setup		-	-	x	x	x	-	x
	QoS setup		-	-	-	x	x	x	-
	Alarm setup		-	-	-	x	x	x	x
	Own port address setup	MAC, IPv4, and IPv6 addresses^*7	x	x	x	x	x	x	x
	Own port address setup	VLAN setup	-	-	-	x	x	x	x
	IPv4 emulation(ARP and PING)		x	x	x	x	x	x	x
	IPv6 emulation(NDP and PING)		-	-	-	x	x	x	x
	MAC address auto learn(IPv4)		x	x	x	x	x	x	x
	Auto address generation(IPv6)		-	-	-	x	x	x	x
	PING test setup^*1		-	-	x	x	x	x	x
	ETH-OAM setup^*3		-	-	-	x	x	x	x
	PHY register setup^*1		-	-	-	x	x	x	x
Transmit clock adjustment			-	-	-	x	x	x	x
Statistics	Transmission start/stop/reset		x	x	x	x	x	x	x
	Insert frame transmission start/stop		x	x	x	x	x	x	x
	Link down generation start/stop		x	x	x	x	x	x	x
	Bit error insertion		x	x	x	x	x	-	x
	LF transmission start/stop		-	-	x	-	-	x	x
	RF transmission start/stop		-	-	x	-	-	x	x
	Screen freeze/release		x	x	x	x	x	x	x
	Dynamic view/fixed view^*3		x	x	x	x	x	x	x
	Statistics result display^*8		x	x	x	x	x	x	x
	Alarm log display		-	-	-	x	x	x	x
	Statistics for each QoS		-	-	-	x	x	x	-
	Late collision detection		-	-	-	x	-	x	x
	Statistics calculation result display		x	x	x	x	x	x	x
	PING test result^*1		-	-	x	x	x	x	x
	CCM frame transmission start/stop^*3		-	-	-	x	x	x	x
	RDI bit insertion start/stop^*3		-	-	-	x	x	x	x
	ETH-OAM test result^*3		-	-	-	x	x	x	x
Capture	Capture filter setup		-	-	x	x	x	x	x
	Capture trigger setup		-	-	x	x	x	x	x
	Capture buffer setup		-	-	x	x	x	x	x
	Receive frame capture		-	-	x	x	x	x	x
	Link partner ability display		-	-	-	x	x	x	x
	Preamble capture^*1		-	-	-	x	x	x	x
	ETH-OAM capture^*3		-	-	-	x	x	x	x
	ETH-OAM capture setup^*3		-	-	-	x	x	x	x

These functions are available on AE5511 and TTPControlWindowE version R9.1.0.0 or later
Up to sixteen instruments (512port)
These functions are available on AE5511 and TTPControlWindowE version R10.1.0.0 or later
AE5520, 5521, and 5522 by units, AE5523/AE5524 by port
Available on the AE5523 on the 1000BASE-T
127 frames on Traffic mode, 1 frame on BERT mode
The stateless address auto comfiguration is available on the AE5523, and AE5524.
For a list of statical itmes