The Monitor mode is the accessmode in which you can log in to one of the AE5511s and monitor the settings and statistics of the port on which another useer is controlling the AE5511. In Monitor mode, you can log into Admin mode and User mode, but Admin functions are not available.

Note: Monitor mode are available on AE5511 and TTPControlWindowE version R10.1.0.0 or later

The AE5523 and AE5524 support Ethernet OAM (ETH-OAM) confirming to the ITU-T Y.1731 recommendation and IEEE802.1ag standard. ETH-OAM frame transmission, reply, statistics, and capture can be performed. Also all units support creation of ETH-OMA frames using Frame Builder and transmission of created ETH-OAM frames.

Ethernet OAM (operation, administration, and maintenance) is a function for maintaining and managing Ethernet networks. Maintenance and management is performed by Ethernet layer. The following three function are used for Ethernet OAM fault management.

Note: Ethernet OAM are available on AE5511 and TTPControlWindowE version R10.1.0.0 or later

Note: These functions are available on AE5511 and TTPControlWindowE version R10.1.0.0 or later


In the dynamic display, blank lines and statistical items that are invalid or “0” on all ports from the statistical items selected in “Selecting the Items Shown on the Statistics Window” are cleared from the Statistics window. During dynamic display, if statistical items that are invalid or “0” on all ports changed to valid or something other than 0, the changed statistical items are displayed.




In fixed display, statistical items selected in “Selecting the Items Shown on the Statistics Window” are displayed in the Statistics window.

Product Home

Specifications

Application

Unit lineup