|
 |
Attenuation ratio: 1/10 with 50 Ω load
Input voltage range: ± 10V |
|
 |
Bandwidth: DC to 50 MHz (-3dB)
Maximum continuous input range: 30 Arms
Amplitude accuracy (DC, and 45 to 66 Hz, 0 to 30 Arms): ±1% of rdg ±1 mV
|
|
 |
 |
700924 100 MHz differential probe |
Attenuation ratio: Can be switched between 1/100 and 1/1000
Max. differential allowed voltage: ±350 V/(1/100), ±1400
V/(1/1000) |
|
 |
|
701921 100 MHz differential probe |
Attenuation ratio: Can be switched between 1/10 and 1/100
Max. differential allowed voltage: ±70 V/(1/10), ±700
V/(1/100) |
|
 |
|
701922 200 MHz differential probe |
Attenuation ratio: 1/10 with 50 Ω load
Max. differential allowed voltage: ±20 V |
|
 |
Attenuation ratio: 1/10 with 50 Ω load
Max. differential allowed voltage: ±12 V |
|
 |
|
701941 Miniature Passive Probe |
Bandwidth: DC to 500MHz (-3dB)
Attenuation ratio: 1/10 (Fixed)
Maximum input voltage: 400Vrms
Cable length: 1.2m |
|
 |
|
701942 Miniature Passive Probe |
Bandwidth: DC to 350MHz (-3dB)
Attenuation ratio: 1/10 (Fixed)
Maximum input voltage: 400Vrms
Cable length: 3m |
|
 |
|
701944 100:1 Probe |
Bandwidth: DC to 400MHz (-3dB)
Attenuation ratio: 1/100 (Fixed)
Maximum input voltage: 1,000Vrms, 6,000Vpeak
Cable length: 1.2m |
|
 |
|
701945 100:1 Probe |
Bandwidth: DC to 250MHz (-3dB)
Attenuation ratio: 1/100 (Fixed)
Maximum input voltage: 1,000Vrms, 6,000Vpeak
Cable length: 3m |
|
|
|
| · |
DL1720E/ DL1735E/ DL1740E/ DL1740EL |
|
|
|
|
DL Series Selection Guide
Find the right one for you! |
Serial Bus Analyzer Selection Guide
For I2C, CAN, and SPI analysis |
Probes for Digital Oscilloscopes
Supporting a variety of measurement |
Accessories for DL series
Accessories other than probes |
|
|
|
|
|
