|
| Features (1) | Features (2) | Simple and Enhanced Triggers | Power Analysis Functions | | Serial Bus Analysis Functions | Connecting with PC via WebDAV | Rear Panel | |
|
|
|
|
- Probe Power Connectors
Probe power connectors for active probes and for the 701935 Deskew signal source. The DL7400 Series comes standard with 4 connectors. 4 additional connectors can be added as an option.
- RGB Video Signal Output Connector
Outputs a video signal for viewing waveforms on an external monitor.
- USB-PC Connector
Complies with USB Rev 1.1.
- USB Peripheral Device Connectors
Complies with USB Rev 1.1.
Type A connectors: 2 ports compatible with USB Flash memory*, HD drive*, USB printers, keyboard and mouse.
*: Available only when the following description is included in the Misc → Overview menu.
"USB Storage Yes"
- SCSI (optional)
- Ethernet (optional)
Complies with 100BASE-TX and 10BASE-T.
- PC Card Interface
Flash ATA card (PC card Type II)
- External Trigger Input/External Clock Input/Trigger Gate Input
Inputs DC to 100 MHz signal for external triggering (external trigger input).
Inputs clock signal from 40 Hz to 20 MHz from exterior (external clock).
Trigger occurrence can be controlled using external signal (trigger gate input).
- Trigger Output
Outputs TTL level trigger signal.
- Logic Inputs
Logic probe connectors. Two 8-bit logic probes can be connected. (701980 and 701981 logic probes sold separately)
|
|
|
|
|
|
|
|
DL Series Selection Guide
Find the right one for you! |
Serial Bus Analyzer Selection Guide
For I2C, CAN, and SPI analysis |
Probes for Digital Oscilloscopes
Supporting a variety of measurement |
Accessories for DL series
Accessories other than probes |
|
|
|
|
|
