| Supported FlrxRay bus: |
FlexRay Protocol Specification version 2.1 |
| Max. sampling rate: |
2GS/s |
| Bandwidth: |
500MHz |
| Max. record length: |
16MW (changeable depends on model) |
| FlexRay signal input: |
Differential signal input between BP and BM using a differetial probe |
| Bit rate: |
10Mbps / 5Mbps / 2.5Mbps |
Trigger functions |
| Trigger source: |
CH1 or CH3: FlexRay signal
The other CHs: Analog signal
|
| Trigger types: |
Frame Start / Payload preamble, Null frame, Sync Frame, Setup Frame indicators / Frame ID / Cycle count (Payload) Data
CRC Error Trigger
Combination trigger of FlexRay signal and the other analog signals
|
Analysis functions |
| Analysis target channels: |
Any two channels selected from CH1, CH3, CH5* or CH7* can be specified simultaneously.
(*: DL7480 only) |
| Max. analyzable length: |
8MW (701460 / 701480)
2MW (701450 / 701470) |
| Min. required sampling rate for analysis: |
Eigth(8) times or more of the FlexRay signal bit rate |
| Sample point: |
Approximate point is accepted when the sample rate and the multiple of eight(8) times as bit rate are different. |
| Number of analizable frame: |
Max. 4000 |
| Auxiliary analysis funtions: |
Bit value display, Search function, Field jump function, FlexRay cursor, Cursor jump function,
Time interval measurements between BSSs
|
| Error detection: |
Header CRC / CRC discrepancy error
TSS / BSS / FES undetectable error |
| Others: |
Voting window management, Bit Clock Alignment management |
