Digital Oscilloscopes DL9000 Series

	Home / Our Businesses / Test & Measurement / Products / Digital Oscilloscopes /
	Digital Oscilloscopes DL9040/ DL9140/ DL9240 Series

Product Home

Specifications

Features

· Functions

Software

Options

Accessories

Functions

1 2 3 4

Enhanced Analysis & Math (1)	Enhanced Analysis & Math (2)	Connectivity	Comes Standard with a Wide Variety of Dedicated CAN Bus Triggers
Supports System Debugging and Troubleshooting	Simultaneous Analysis & Display of Tow Different CAN Bus Signals	Automatically Search Captured Signals for Specific Frames/Fields

Use USB 2.0 interface (standard), 100BaseTX /10BaseT (option), or GPIB (available using a National Instruments NI PCMCIA-GPIB card) to remotely control the DL9000 and to transfer waveform data from the scope. The industry standard USBTMC-USB488 with USB 2.0 interface offers data transfer rates that exceed typical GPIB data transfer rates.
For data storage, you can use a PC card drive (available in both front and rear panels) or USB interface. These interfaces support media such as CompactFlash, PC Card type II HDD, and USB memory

Connectivity

GPIB interface
(Two PC card interfaces are standard. However, a NI PCMCIA- GPIB card is required for communication. You can use the front or back panel PC Card interfaces for this purpose.)

PC Card/USB interfaces

Use popular, widely available, large capacity media such as CompactFlash or USB HDD to save and transfer waveform data captured with the DL9000.
A USB mouse and/or keyboard can be used to facilitate operation of the unit. The front USB port can also be used to connect to a USB printer.