You need a fast waveform update rate to maximize your chance of catching that infrequent waveform variation. You also need an oscilloscope that doesn’t become sluggish and unresponsive with processor intensive functions or deep memory enabled. Yokogawa’s Advanced Data Stream Engine (ADSE) is unmatched in this area. Logic channel inputs, and even bus display mode, won’t affect the update rate, giving you the best possible real time display and analysis of mixed signal waveforms.

Maximum update rate:
	25,000 waveforms/sec (2.5kW, Normal Trigger Mode)
	2,500,000 waveforms/sec (2.5kW, N Single Trigger Mode)
Maximum update rate in math mode:
	60 waveforms/sec	(1 MW, when performing channel addition)
	12 waveforms/sec	(5 MW, when performing channel addition)
Maximum update rate in parameter measurement mode:
	60 waveforms/sec	(1 MW, when measuring a channel’s maximum value)
	16 waveforms/sec	(5 MW, when measuring a channel’s maximum value)

Note: The above rates can vary depending on the oscilloscope settings.

State display and bus display functions are typically found in logic analyzers. DL9000 Series MSO Models support these types of logic signal display and analysis functions, and helps increase efficiency in the coordinated analysis of analog and logic signals. Moreover, when performing these analysis and display functions on DL9000 Series MSO Models, the screen display update rate is not compromised.

DL9000 Series MSO Models not only update the display at high speed, but also includes a function for recalling up to 2000 screens worth of past waveforms.
High-speed screen updating alone does not allow users to take full advantage of the digital oscilloscope. Rather, the ability to redisplay and analyze individual waveforms unleashes the digital oscilloscope's full potential.

Product Home

Specifications

Functions

Software