|
Yokogawa’s 701928, 701929, 701930, 701931 701932 and 701933 current probes make it easy to observe current waveforms on
an oscilloscope. Depending on your signal’s bandwidth and maximum current, you can choose the right current
probe for your measurement
 |
Bandwidth: DC to 2/10/50/100 MHz
Max current: Max 30/150/500 A
Clamp configuration makes current measurements easy
No external amplifier required: Connects directly to DL series
instruments
Powered by the DL's probe power supply connectors
Current values can be read directly on DL series instruments
Includes Demagnetizing switch and zero adjust dial functions
|
|
 |
This probe doesn’t need an extra power connection (LEMO connector),
can be recognized automatically and
adjust zero position from the operation of the DL9000 series.
Frequency bandwidth: DC to 100 MHz
Maximum continuous input range: 30 Arms
The basic specifications of the probe are the same as 701932. |
|
 |
Bandwidth: DC to 100 MHz (-3dB)
Maximum continuous input range: 30 Arms
Amplitude accuracy (DC, and 45 to 66 Hz, 0 to 30 Arms): ±1%
of rdg ±1 mV |
|
|
This probe doesn’t need an extra power connection (LEMO connector),
can be recognized automatically and
adjust zero position from the operation of the DL9000 series.
Frequency bandwidth: DC to 50 MHz
Maximum continuous input range: 30 Arms
The basic specifications of the probe are the same as 701933. |
|
 |
Bandwidth: DC to 50 MHz (-3dB)
Maximum continuous input range: 30 Arms
Amplitude accuracy (DC, and 45 to 66 Hz, 0 to 30 Arms): ±1%
of rdg ±1 mV |
|
 |
Bandwidth: DC to 2 MHz (-3dB)
Maximum continuous input range: 500 Arms
Amplitude accuracy (DC, and 45 to 66 Hz, 0 to 500 Arms): ±1%
of rdg ±5 mV |
|
 |
A power supply for current probes, FET probes, and differential probes.
Supplies power for up to four probes, including large current probes.
Number of power supply connectors: 4
Output voltage: ±12 V ±0.5 V
Rated output current: +12 V: 2.5 A, -12 V: 2.5 A (the total value of four outputs)
Rated supply voltage: AC100 to 240 V (50/60 Hz)
External dimensions: approx. 80 (W) x 119 (H) x 200 (D) mm
Weight: approx. 1.1 kg
|
|
|
 |
Another probes and Accessories |
|
|
|
| · |
Probes for Digital Oscilloscopes |
|
|
|
|
DL Series Selection Guide
Find the right one for you! |
Serial Bus Analyzer Selection Guide
For I2C, CAN, and SPI analysis |
Probes for Digital Oscilloscopes
Supporting a variety of measurement |
Accessories for DL series
Accessories other than probes |
|
|
|
|
|
